Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: I need a boat shed

  1. #1
    Join Date
    Jan 2011
    Location
    North Carolina
    Posts
    4,279
    Post Thanks / Like

    Default I need a boat shed


    I'm considering a metal building on a concrete slab. Any suggestions on where/who to purchase this building from? Any reviews on companies like Diamond, Tarheel or Bear? Thanks in advance!

  2. #2
    gabowman is offline Super Moderator * Crappie.com Supporter
    Join Date
    Dec 2005
    Location
    Elberton, Georgia
    Posts
    39,231
    Post Thanks / Like

    Default

    No recommendations on brands. Just get it BIG! You will want shelves all the way around to put all your jigs, etc. And, you will also want to be able to store all your rods, reels, tackle, etc. Since I built my building Ive added leans to my building TWICE now just to get my stuff out of the weather. I don't like leaving ANYTHING setting out in the weather. The weather will eventually ruin ANYTHING.
    Health nuts are going to feel stupid someday, lying in hospitals dying of nothing.
    Likes kycreek LIKED above post

  3. #3
    Join Date
    Dec 2010
    Location
    Sandy Run South Carolina
    Posts
    3,520
    Post Thanks / Like

    Default

    If you want to save money and get a nice solid building without the need to pour concrete consider a pole barn. You can get kits to build yourself, or have the company that manufactures it install for a nominal fee. Here's a pic of mine. I installed the gables and the siding myself to save money. This is a 36x24. You can get most any size built to your specs. As you can see, this one is used as a carport.
    Name:  Polebarn.jpg
Views: 511
Size:  89.3 KB
    Professional Crappie Removal
    Safe and ethical
    One rod, one jig, one fish at a time.


    Likes LR77, SeaRay, Herewego, dignlevel LIKED above post

  4. #4
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default

    Nice! That's new since last I was there. Wish I had room for one.
    Mark 1:17 ...I will make you fishers of men
    Likes Inkdabber LIKED above post

  5. #5
    Join Date
    Oct 2017
    Location
    Belmont, NC
    Posts
    313
    Post Thanks / Like

    Default

    Make sure you get one bigger than what you think you need. THis coming from a guy who has a 16' skiff sitting in an 18' garage! Keep us informed of what you find out about the dealers too. Me and my dad are going to build one this fall for his offshore boat and camper. He's deciding b/w metal and a pole barn.
    Ankona Cayenne Kevlar, Suzuki 60

  6. #6
    Join Date
    Feb 2008
    Location
    Charleston, South Carolina
    Posts
    8,239
    Post Thanks / Like

    Default

    I just ordered a 10x24x31 metal carport with sides for pontoon and other vehicle.
    Putting on gravel that is not level, maybe 6 inches difference.
    They charge a $100 to cut legs on one side to level.
    If concrete is not that much higher in price l would go that way if you have a level site.



    Sent from my SM-G935V using Crappie.com Fishing mobile app
    It's not the numbers or the size, it's the time spent on the water!

  7. #7
    Join Date
    Nov 2008
    Location
    Weddington NC
    Posts
    3,307
    Post Thanks / Like

    Default

    Herewego, would it be cheaper to pour some footings on the down hill side to level it up, maybe a 15"x15" at each post?

  8. #8
    Join Date
    Dec 2010
    Location
    Sandy Run South Carolina
    Posts
    3,520
    Post Thanks / Like

    Default

    The reason I went pole barn over the metal type carport was due to my yard sloping in two different directions. It was far cheaper and easier to cut the poles of a pole barn to level then to add footings. With the new metal trusses, only 6 poles and 3 trusses were needed to build my 36x24 carport. The poles are also concreted 4 feet in the ground which guarantees a wind resistance of 120 mph.

    Quote Originally Posted by ScooperDude View Post
    Herewego, would it be cheaper to pour some footings on the down hill side to level it up, maybe a 15"x15" at each post?
    Professional Crappie Removal
    Safe and ethical
    One rod, one jig, one fish at a time.



  9. #9
    Join Date
    Feb 2008
    Location
    Charleston, South Carolina
    Posts
    8,239
    Post Thanks / Like

    Default

    Quote Originally Posted by ScooperDude View Post
    Herewego, would it be cheaper to pour some footings on the down hill side to level it up, maybe a 15"x15" at each post?
    The legs fit a continuous piece of tubing laying on ground or concrete slab if you have slab.
    To ground they drive rebar rods through bottom tube.
    Concrete they put anchors through tubing.
    I had site dug and gravel spread last year for 18x24 gravel pad but now want 24x31.
    I need more gravel to level up but ground is too wet right now.
    I have seen several around here on concrete pad and on ground.
    I already had gravel leftover from gravel drive pit in behind my detached garage.
    Research the cost how much you want to spend.
    10x24x30 metal carport installed is around 3k.

    Sent from my SM-G935V using Crappie.com Fishing mobile app
    It's not the numbers or the size, it's the time spent on the water!

  10. #10
    Join Date
    Oct 2010
    Location
    SC
    Posts
    35
    Post Thanks / Like

    Default

    gaport.com

    That is who did my shop 13 yrs ago & my camper shed 6 years go, no complaints so far.
    You can actually price it o the website.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP