Another little tip, those Bass Pro rod floaty things will float a 10 foot Denali rod with a Daiwa line counter on it.
Dont ask questions just trust me!!!
Sent from my SM-G935V using Crappie.com Fishing mobile app
It's easy to forget what we know and what we have learned.
About 45 minutes ago I made a pretty good turn cranking. One of the outside poles doubled up so I picked up my speed from 1.5 to 2.0, went from 4 in the box to 11.
At 2.0 on my boat the trolling motor had to be on 7 to 7.5 with very little wind, remembered an old trick from when I first started cranking. Raised the outboard only the skeg was in the water, 5.5 now does what I need.
Hope these little tips help someone.
Sent from my SM-G935V using Crappie.com Fishing mobile app
Another little tip, those Bass Pro rod floaty things will float a 10 foot Denali rod with a Daiwa line counter on it.
Dont ask questions just trust me!!!
Sent from my SM-G935V using Crappie.com Fishing mobile app
By the way while pulling cranks and looking back, keep an eye out for trees, trees will make you text Bass Pro products.
Sent from my SM-G935V using Crappie.com Fishing mobile app
Good info, thanks!
yep ! things are easier with normal pool levels . Cheaper too .
Those 16' denali rods will float to. Hung 5 in a brush pile with a strong wind blowing. Dumped em all.
crp4570 LIKED above post
Does pulling crankbait with the trolling motor yields more bites than pulling with the big motor? I caught plenty of with both methods but wondering if the big motor scares some of the crappies away.
I cant tell any difference
Sent from my SM-G935V using Crappie.com Fishing mobile app
1990 Stratos 285 Pro 200 HP Merc
SpyderLok Rod Holders
Proud Member of Team Watch The Finger!!!
(662) 458-8925