Redneck carpet stretcher

**spartannation** · 01-21-2018, 03:56 PM

I'm pretty proud of this idea. I had a hard time getting the carpet on one of my panels tight so after a little head scratching I figured out a solution. I wrapped and stapled the carpet around one of the edges. Then I put that edge away from me and made several cuts in the carpet perpendicular to the edge towards me. This created a series of flaps. I stapled every other flap to a piece of 3/4 plywood then put a pipe clamp from the panel edge closest to me to the far edge of the 3/4 plywood. When I tightened the clamp it would push the panel away from me while the carpet didn't move, pulling the carpet tight. When the carpet was tight enough, I pulled the free flaps over the edge of the panel and stapled them, then freed the other flaps one at a time and stapled them. Worked like a charm. Name: 0121180958.jpg
Views: 211
Size: 63.7 KB

Name: 0121180958.jpg
Views: 211
Size: 63.7 KB

Name: 0121181001.jpg
Views: 244
Size: 69.1 KB

**"G"** · 01-21-2018, 04:05 PM

Great idea

Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app

**ready2fish** · 01-21-2018, 04:07 PM

I like it, great idea

Any Glue ? or just staples

**spartannation** · 01-21-2018, 04:40 PM

No glue on any of the panels. The old carpet was staples only and lasted 20 years so I figured what the heck. The floor carpet had some glue along the edge so I'll do the same there. One other thing I'm doing is replace screws with machine bolts and lock nuts where I can. Every spring I have to do a once over and tighten all the screws that worked loose. This should take care of part of that problem.

**Just Steve** · 01-21-2018, 05:14 PM

Pretty ingenious

And you call yourself a knucklehead......

Sent from my iPhone using Crappie.com

Thread: Redneck carpet stretcher

Thread Tools

Display

Redneck carpet stretcher

Tags for this Thread

Posting Permissions