No body have any info?
Does anyone have their spyderloc products mounted on a track system using the TS-103 adapter plate , not screwed to the floor.
I've got calls into gene and Manufacture with same questions.
If you used the adapter plate from Millenium to mount your rod holders, trees, ect,ect, what track rails do they fit? Traxstech won't answer call plus they show no 45 degree brackets available.
I also have to be able to use 45 degree brackets that attach to Lund sporttrack rail.
I've got to find a track mfg that the millenium adapter plt will fit.
Thank you and God Bless
I don't have a Lund, but I do have a Tracker. Here is what I did.
I bought 2 of these 90 Degree Bracket for 1/4 inch Accessory Rails
then took the base plates that came with the Millennium trees and mounted them to the above bracket. Now my trees are up on the side of my boat and not in the floor.
sinkermaker LIKED above post
I can help you...I just go to bed early...because I get up early....I have an Alweld that has the 45degree. That bracket in the picture is a 45 degree angle. I have 12 of them. One for each rod holder. Theres a hole drilled for the bolt for the track. It is attached to a 1/4 x 20 pan head screw. The top side has a 3/8 hole for the adjustment handle and it has two tapped holes to hold the bottom ring with the teeth. This maybe a little simpler or cheaper than what it sounds like your looking for. Hope this answer yours question.
Sent from my SM-G975U using Crappie.com Fishing mobile app
S10CHEVY LIKED above post
Excel Storm Cat 230 that I run has 45 degree and 90 degree tracks. I harped at Excel until they made a rail system that fit the 45 degree track. I have my rod rack and Da'ducer mounted on it. I mount my Millennium rod holders to their bases screwed into my deck.
www.crappie-gills-n-more.com
Podunk Ideas Pro Staff /test platform
PICO Lures Field Rep
Excel Boats Pro Staff
Sent from my iPhone using Crappie.com
www.crappie-gills-n-more.com
Podunk Ideas Pro Staff /test platform
PICO Lures Field Rep
Excel Boats Pro Staff
S10CHEVY LIKED above post
Now that's slick
Sent from my SM-G975U using Crappie.com Fishing mobile app
M R Dux thanked you for this post
Thank you for your responses!
I've got millenium rod holders and I want to add their trees for planners boards later,
If I had dimensions of their adapter bracket I could canvess other manf to find their track sizes.
I'm gonna call millenium again an dpester them,
Thanks again for responding))
hi - tek also has a 45 degree system
keep your lines tight as you never know
Both Traxtech and Cisco Fishing Systems sell rail mount adapters specific to the Lund Sport Track system. I’m not sure about your style of fishing but for trolling and boards I would rig up a section of track with two rail mounts on each side so that you can slide your rod holders/board trees forward and aft without unbolting the rail adapters. I had a similar setup before I went to a glass boat and ended up using screws and 5200 to mount my Cisco tracks directly to my top cap on my Ranger.
The flexibility of the track system is unparalleled and is why you see them on so many bigwater walleye and salmon trolling rigs. There are a lot of accessories that can be mounted in addition to your rod holders. They’re underutilized in our circle, but I’ll never not have them on my boat from this point forward. Millenium now makes an adapter for the Spyderlok bases to fit the standard walleye track systems form Cisco, Traxtech, Bert’s, etc. I had mine custom fabricated by Cisco several years ago before Millenium started offering their own solution. Best of luck.