Newbie questions

[Bucky182]

1. What size thread for 1/16 ounce jigs
2. What size eyes for 1/16 Oz jig
3. Is a Renzetti 2000 traveler a good vise for crappie jigs?

[Takeum]

Most guys use danelle 210 for most their ties all sizes unless you want slightly thinner thread which 140 be slightly thinner,,,,eyes depend on what mold uses,,,I’d say between 3 mm - 4 mm and if wanting something slightly larger go 5 mm,,,hope this helps,,,and yes Renzetti is a fine vice if wanting to spend alittle more money, but really isn’t needed for crappie jig making…basic table vice works fine for most guys,,,rotation isn’t really needed….

[Grainraiser]

For thread go with a flat wax 210 denier. This is the most common size most folks use with 140 denier being next most used.
Eye size depends on the flat surface of a 1/16th jig. 3MM-4MM is the most common size. I personally would go with a 3MM to be safe.
I have a Renzetti vice and it works great. Peak and Regal makes a great vise also. Nothing at all wrong with the Traveler.

[SuperDave336]

Love my Peak Vise! I use 210 denier for all my jigs.

[Artjr]

Thanks guys!

[Takeum]

You betcha!

[skiptomylu]

If you like the Renzetti Vise, I had the Saltwater Traveler and loved it! Most guys that Have a Peak love it too! There are several really great vises you can choose from!

Thread mostly 140 and 210 denier, but some use smaller like 70 Denier or 6/0.

Skip