What echomap are you using? You're probably going to need the gms 10 network expander.
I have a pair of garmin echomaps. I have a 20 ft. Ethernet cable to pair them. I will be using a PS22-TR also. My question is do I need a type of splitter? Any parts suggestions?
Sent from my SM-G975U using Crappie.com Fishing mobile app
What echomap are you using? You're probably going to need the gms 10 network expander.
2018 G3 Sportsman 17
2018 Yamaha F90 four stroke
Ultra 106sv bow/console
Livescope Terrova 24v Ionic lithium batteries
If it's the 73 and 93 series, I don't think you can. They only have a single network port. You can hook one to the other, or your ps 22 to one. The only other way would be to hook your ps22 to a port expander and I'm not sure that will work. I'll try to find out.
2018 G3 Sportsman 17
2018 Yamaha F90 four stroke
Ultra 106sv bow/console
Livescope Terrova 24v Ionic lithium batteries
If your 7" is an echomap plus unit it should work although I'm not familiar with the ps22. But you should be able to network them all with a port expander. You can use a cheap unmanaged switch that uses a 12v power supply. I've been using this one for about a year and a half without issue. It's not water proof so it's mounted under the console where it can't get wet.
NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch (GS308) - Home Network Hub, Office Ethernet Splitter, Plug-and-Play, Silent Operation, Desktop or Wall Mount Amazon.com
Sent from my SM-N960U using Crappie.com Fishing mobile app
According to the gurus on BBC, yes you can. You will need the gms10 network port expander. Hope this helps.
2018 G3 Sportsman 17
2018 Yamaha F90 four stroke
Ultra 106sv bow/console
Livescope Terrova 24v Ionic lithium batteries
Helps...and hurts my feelings....thanks
Sent from my SM-G975U using Crappie.com Fishing mobile app
I wouldn't skimp on the network box unless you have an absolutely bone dry storage which does not exist on my boat! Just my 0.02!
catchNgrease thanked you for this post
Ok I think I got all thus lined out. But the connection on the PS22 has the garmin twist ring and no push clip. Can I cut the termination from the factory and put a new cat6 plug on it. I'm pretty sure the answer is yes. But I wanted to be sure.
Sent from my SM-G975U using Crappie.com Fishing mobile app
Garmin support said it is as simple as a cut and rethread..... it definitely voids any warranty was the next thing he said. Stay tuned as I cut a 1000$ cable.
Sent from my SM-G975U using Crappie.com Fishing mobile app