Reply With QuoteMy gen 2 is doing the same thing, mine will do it in any depth, not sure what is causing it. I have the HDI transducer mounted on the trolling motor.
Likes: 0
Thanks: 0
HaHa: 0
Trophy King
Lowrance HDS 7 gen 3 On trolling motor Pausing?
I just installed a HDS gen 3 on my trolling motor. Seems when I am moving sorta slow and in shallow water (2ft-3ft) or less the unit seems to lock up for a minute or so, then it will work again. It is very intermittent, does any one have an idea of what is going on? Other than this small issue I love this fish finder.
Crappie.com Legend
My gen 2 is doing the same thing, mine will do it in any depth, not sure what is causing it. I have the HDI transducer mounted on the trolling motor.
Crappie.com 2016 Man of the Year
* Member Sponsor
Check to see if you have the latest software version for your unit ...
ftp://software.lowrance.com
If so try a soft reset ... (Does not erase waypoints) ...
If that doesn't help try a hard reset ... (Does erase waypoints) ...
Article Details
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Trophy King
Thanks for the feedback. I just uploaded the latest not to long ago. I will try a soft reset.
It did not do it today but I was not shallow. I also have the HDI transducer.
Thanks again.
Crappie.com Legend
I can turn mine off and restart it and it want do it again that day most of the time, but I use mine 2 or 3 times a week most of the time and it only does it every other time out. I've updated it and done the hard reset, I just been living with it, when it does it , I just turn it off and back on and go on fishing.....Originally Posted by rnvinc
Crappie.com 2016 Man of the Year
* Member Sponsor
After the reset is performed it's important to go into the Installation Menu under Sonar and select the correct 2d xducer that is connected to the unit ...
Check the silver tag on the xducer cable to verify which xducer is being used ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Crappie.com 1K Star General
I know several people who had this problem while using the HDI transducer. Go to the sonar menu and reduce the ping speed to something less than maximum. It has fixed the problem in many cases.
Crappie Wall Hanger II
^^^^^ And make sure it's on shallow water setting in the set up menu.
Trophy King
Thanks I will check out the ping settings and look at the shallow water settings.
Great inputs.
Slabmaster II
Do you have the latest software in your unit and are you using the internal transducer on the TM or a Lowrance external transducer
------Jason Gilstrap Pro Staff Lowrance / www.getalimitoutdoors.com
