I haven't read the entire thread ....but you may find some helpful things here...
http://www.bbcboards.net/lowrance-ga...ns-here**.html
Rickie
I need to know what is the best location for the LSS-2 Transducer on the Ranger for this install.
Diehard
Ranger 519 VX 200 HO
I haven't read the entire thread ....but you may find some helpful things here...
http://www.bbcboards.net/lowrance-ga...ns-here**.html
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
The best area would be on the side of the jack plate, but you will also need to seal off the interior of the Jp (aluminum plate). Or you can get an echo chamber effect going on. If you dont have the JP then your looking at the step area. Problem is the length of the lss2 sticking out further than what the lss1 would have.
You want no obstruction on either side of the ducer,,,anything that might block the field of view.
pm sent