Thread: sonar delima! need help!

Why not go with 2 898's. And do you slow troll? Buy the biggest screens you can afford the first time.

Originally Posted by mduncan62

Why not go with 2 898's. And do you slow troll? Buy the biggest screens you can afford the first time.

I guess I should've said the first go around,a little too much for the pocket book rigth now.but hey I like the way you think!!

I slow troll the least!!

I went with Lowrance and was going to go with 2 smaller units. Virtually everyones advice was to go with the bigger screen.
I decided to skip the smaller units and ended up with an HDS-8 w/ SI. I only have the one unit but I can always add to it later.
I'm glad I took their advice.

Originally Posted by crappiemax

I went with Lowrance and was going to go with 2 smaller units. Virtually everyones advice was to go with the bigger screen.
I decided to skip the smaller units and ended up with an HDS-8 w/ SI. I only have the one unit but I can always add to it later.
I'm glad I took their advice.

I've been running across this a lot.get the bigger screen if you can!!thanks for your input!

Originally Posted by zwalls

first of all let me say I'm definitly going with Humminbird sonars.my original plan was to add a sonar with just GPS for the maps at my console.I wasn't really planning for anything else until I started looking at all of em.

so know my plan is for 2 sonars.one at the bow and at the console.I've gone back and fourth on which to get where.do I put Si at the bow and just Di at the console or visa versa? or Si at both places.Doh

naturally I spend 90% of my time at the bow fishing and I know how Si can react to moving the trolling motor,but I imagine I can deal with that.

so here are my combinations:
2-798 ci HD Si cimbo's bow and console
798 ci HD Si and a 788 ci HD Di, bow or console
898 c Si combo at the bow and a 798 or a 597 ci HD Di combo at the console
798 at the bow and a 597 at the console or visa versa

or any other ideas that anyone may have.

the problem I'm having is trying to decide how much will I use Si at the console or the bow.is side imaging worth the money for crappie fishing?I fish the Atchafalya basin in south louisiana most of the time if this matters!!

any help or suggestions would be appreciated!!Thumbs Up

Z

SI on the bow is invaluable....

When I'm creeping up on a marked brushpile with my chart view / SI view split screen...

If I miss the brushpile by 5ft left or right it wouldn't show up on the 2d in shallower water...

The SI tells me exactly which side of the boat I missed the brushpile....

Rickie

Originally Posted by rnvinc

SI on the bow is invaluable....

When I'm creeping up on a marked brushpile with my chart view / SI view split screen...

If I miss the brushpile by 5ft left or right it wouldn't show up on the 2d in shallower water...

The SI tells me exactly which side of the boat I missed the brushpile....

Rickie

thanks for the advice.this is kind of the way I've been leaning towards is putting Si at the console and Di at the bow!!

Originally Posted by zwalls

thanks for the advice.this is kind of the way I've been leaning towards is putting Si at the console and Di at the bow!!

Remember.... because of the shape of the sonar beam and the way those returns are displayed on the screen...

DI will show brush under your transducer in the sonar beam...

SI will show you which side of the boat it is on...

Rickie

I'd go dual SI units. You will get more information from them.