I like that tm mount. Its all coming together really nice RCC.
Great Job ! Let us know how the MKA-47 works on the water RR
I like that tm mount. Its all coming together really nice RCC.
Had several things to happen scheduled and unscheduled to prevent work on the boat till late this evening. Had a little while left today so I thought I would try to finish the transducer mount. I wanted to put rubber mat behind the aluminum to fill the gap between the mount and the boat, but things did not work out, so I used a piece of cutting board which I ground to shape then drilled, tapped, and fastened to the aluminum mount with #8 machine screws. This whole assembly has now been plasti-dipped and is hanging out to dry. Hopefully this will happen before the rain gets here. The screw holes for the transducer have already been drilled and tapped for #8 machine screws as well.
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.
Plasti-dip is done. So a little final assembly is all that is needed to finish the transducer mount.
First a little leveling across the boat deck.
Once the deck is leveled, I then can level the transducer bracket...
and check how deep the transducer will run.
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.
And there it is. A no holes drilled in the hull, transducer mount. Now what did I do with the anti-rooster tail plug
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.
yea I had that problem too,, raise it up, down side is you have to come down to half throttle to check depth on a spot but that shower sux
You're hired!!! That's some good stuff.
"Another day on the water..."
Now that right there is brilliant! You come up with some great stuff, dude! If I ever get a boat upgrade, I want to hire you to do me a "no-holes" transducer mount!
My wife keeps saying I never listen to her....... or something like that!
Ok you have made me curious what is this business about 23' and 24.5'. I ask because I am planning to put a new tongue in my trailer. The trailer that came with my boat (all used ) is really to short for my boat and I have to back way to far down into the water.
FISH ON
RCC's Crappie Eradication Service
Eliminating your slab problems one fish at a time
For free estimates give us a call at O U 812.