I welded mounting tabs on the canopy frame so I could add lighting. These BBQ competitions you're working before daylight and after dark so my guys needed light. I ask them to order 3 of these 12 volt Spreader LED Flood Lights and I would install them.

Name: Canopy Wiring and Lighting 1.jpg Views: 24 Size: 69.4 KBName: Canopy Wiring and Lighting 2.jpg Views: 24 Size: 40.0 KBName: Canopy Wiring and Lighting 3.jpg Views: 24 Size: 37.4 KB

I terminated the Lites with marine grade Butt connectors and where I had dissimilar diameters in copper conductors I used Step-Down Butt connectors. If you look close at the connectors pictured the blue stripe inside the connector insulation designates the 14-16 gauge wire side where the other end is for 10-12 gauge wire.


Name: Canopy Wiring and Lighting 4.jpg Views: 23 Size: 27.5 KB

I ran all the wire internally in the pipe as much as I could.

Name: Canopy Wiring and Lighting 5.jpg Views: 23 Size: 115.9 KB

And tested the lites before pulling the trailer home.

Name: Canopy Wiring and Lighting 6.jpg Views: 24 Size: 68.0 KBName: Canopy Wiring and Lighting 7.jpg Views: 24 Size: 60.5 KB