go to the Mississippi board and read pulling cranks 101 have fun
https://www.crappie.com/crappie/miss...-cranks-101-a/
I am starting to learn to fish for crappie by pulling cranks. What gear do you all recommend.
1) 8 or 10 lbtest? Any specific line?
2) what length rods and will any baitcasters work? What do you recommend?
3) how many lines should a guy run?
4) bandit 300s or anything else?
Thanks everyone for your help!
go to the Mississippi board and read pulling cranks 101 have fun
https://www.crappie.com/crappie/miss...-cranks-101-a/
A gun, like any other source of power, is a force for either good or evil, being neither in itself, but dependent upon those who possess it
From an old movie I saw
PICO INT's
I have spent most my life fishing........the rest I wasted.
PROUD MEMBER OF TEAM GEEZER
PICO Lures Field Rep
Pico LIKED above post
What he said read the hole thread it’s long but will answer a lot of questions. It helped me a lot
Sent from my iPhone using Crappie.com Fishing mobile app
Skippa Chippa LIKED above post
Definitely check out the Mississippi board post
Here is what we use
10lb hi vis line mr crappie line
8ft,10ft,12ft,14ft b and m trolling rods
Bandit 200 for shallower water
300 for deeper water
Okuma bait caster reels with line counters on them
Hope this helps ya out some
Good luck
Sent from my iPhone using Tapatalk
Joedog, peculiarmike LIKED above post
SHAKESPEARE ATS TROLLING REEL - Northwoods Wholesale Outlet
I think these are a good reel for the money.What we use
A gun, like any other source of power, is a force for either good or evil, being neither in itself, but dependent upon those who possess it
From an old movie I sawLSL Angler LIKED above post
There is a member M R DUX (Doug Wynn) who guides on Kentucky Lake/ Lake Barkley who could give you some good advice. He recently competed in the national championship on Grenada in Mississippi. I read his posts and he seems to be super knowledgeable, I don’t know him personally but try to glean his knowledge from reading his posts. I am sure he will try to help you.
“If your too busy to fish, you’re too busy!” Buddy Ebsen
PROUD MEMBER OF TEAM GEEZER
(Billbob and “G” approved!)
Proud member of Tekeum’s Jigs Pro
Staff
https://heavenornot.net/
heavenornot.netLSL Angler LIKED above post
Kinda depends what lake your cranking and how much you will get hung up. Lotta snags I'd want braid to pull your bait out...no snags mono is fine. Everyone is fixed on Bandits but really any number or crank baits will work just run a couple different depths to see how they are biting. Remember if have a crank bait that runs 13 feet and make a bomb cast or let a lot of line out it may run well over 20 feet. If you are running out the side or front of the boat stagger your rod lengths ( like a 10 footer and a 7 footer )..run out the back doesn't really matter. I would just run 2 to 4 rods until you think you can or want to run more...And you don't have to spend a fortune on equipment remember the trolling motor is doing the work not the rod or reel
"In my father's house are many mansions..." John 14:2