years ago wed use white adhesive tape which seemed to work good for us. back then nobody would even consider painting a rod tip with white paint. i think id try the adhesive tape before the reflective tape cause it will probably go on a little better and it probably has the same reflective qualities of flat white paint. If you put a piece of tape where you want the paint to end, you get a good sharp edge which looks almost like it was done at the factory and dont look so bad as having that feathery edge where the paint ends. I dont know how wide you can get the adhesive tape in. you may have to put a couple pieces side by side to give you enough to make it easy to see. since reflective tape works best with a light shining directly on it and bouncing the beam back to you, the big angle involved from the back of the rod where you are sittin to the rod tip, you probably aint gonna be able to tell you got reflective tape on it. I might be wrong tho. id try it both ways if i dint wanna paint my tips to see which works the best.Originally Posted by Big Dave 53