Thanks: 
How did u dent the front sides? I have done that breaking ICE
Sent from my VS835 using Tapatalk
HaHa: 0
Trophy King
*** Price Reduced ***
*** Price Reduced ***
$6,000 for everything except the new battery and seat. Y'all are killing me, that's $500 off! I need this boat gone since I don't use it anymore. I am exclusively using my kayak for fishing now since it is too quick and easy to fish some of these smaller private lakes around my house. Nothing is wrong with the boat, motor, trailer or any of the gear... it just needs a new home since I've started fishing out of a kayak. I believe it was a fair price at $6,500 and at $6,000 it is even sweeter! Let me know if you have any questions or just want to purchase it before your neighbor does...
Paddle Straight and Prosper
~~~~~~~~~~~~~~~~~~~~~~~~
Old Town Discovery 158 Canoe
Crappie Wall Hanger II
How did u dent the front sides? I have done that breaking ICE
Sent from my VS835 using Tapatalk
Trophy King
I assume that you are joking... There are no dents on the boat. What you are seeing is where the sheet metal has been welded to the internal frame and the angle of the sun along with the slight angel of the metal might give it that appearance. but I assure you when you are there beside the boat looking/inspecting it, you will see what I mean and that there are no dents on the boat. Just sun, camera angle and the way Tracker welds their boats. It was bought that way.Originally Posted by rebranger
Also, the boat has never been on any Antarctica excursions breaking through any ice nor have any ice bags been banged on the boat. She has been babied all her life and only driven around the block on Sunday to Church to watch the fishing that goes on behind the Church on Sunday afternoons...
Last edited by FlyBye; 06-12-2017 at 09:37 PM.
Paddle Straight and Prosper
~~~~~~~~~~~~~~~~~~~~~~~~
Old Town Discovery 158 Canoerebranger LIKED above post
Crappie Wall Hanger II
Like that!!
Sent from my VS835 using Tapatalk
Crappie Wall Hanger II
Cell phone pics r too small for older eyes!
Sent from my VS835 using Tapatalk
Edgar Hood lll
5651 Flower Lake Rd
Dundee, MS 38626
256-883-8615 [email protected]
Trophy King
*** Price Reduced ***
$5,400 for everything except the new battery and seat. $5,550 with the new battery and seat. I need this boat gone since I don't use it anymore. I am exclusively using my kayak for fishing now since it is too quick and easy to fish some of these smaller private lakes around my house. Nothing is wrong with the boat, motor, trailer or any of the gear... it just needs a new home since I've started fishing out of a kayak. I believe it was a fair price at $6,500 and at $5,400 it is even sweeter! Let me know if you have any questions or just want to purchase it before your neighbor does...
Paddle Straight and Prosper
~~~~~~~~~~~~~~~~~~~~~~~~
Old Town Discovery 158 Canoe
Trophy King
*** Final Price Reduction ***
*** Final Price Reduction ***
$5,000 for Everything! That's right Everything!
* 17 foot All Weld Aluminum Boat with spacious 54” floor width
* Tohatsu 4 stroke 20 horsepower (approx. 13 hours on motor)
* Minn Kota Traxxis 55 pound thrust with Variable Speed Upgrade
* Tracker Boat Trailer with Aluminum Fenders, Step Plates, and Long Bunk Guide Pads
* Drift Master Spider Rig Rod Holders
* Custom Versa Track Sliders for either Extra Rod Holders or Multi Rod Transport
* Installed Flush Mount Wired Plugs for included Bow/Stern Navigational Lights
* Comfortable Removable Padded Seat with Raised Seat Post
* Heavy Duty 4 AWG Marine Boat Wiring for Trolling Motor
Paddle Straight and Prosper
~~~~~~~~~~~~~~~~~~~~~~~~
Old Town Discovery 158 Canoe
Crappie.com 1K Star General
How fast does it run with 1 person in it?
Trophy King
How fast you ask... Faster than Michael Phelps can swim!
I have never clocked it or held a GPS up to see, but I know that it travels faster than I care to go most of the time* and even with gear and a family of four, I've never even noticed a reduction in speed (there isn't a lot of weight in the boat itself because of it's open floor plan). But keep in mind that of the 13 hours that I've run the motor, only about 30 minutes or so have been wide open because of the break in period. I've followed the manual for the break in period. So it's plenty fast for my needs, but it isn't a speed boat. If speed is what you are looking for perhaps a heavier fiberglass bass boat that would be more designed to handle the beating that a 300 hp could deliver. :-)
* On Sardis Lake in Mississippi where the wind and wave is often noticeable and felt at higher speeds.
Paddle Straight and Prosper
~~~~~~~~~~~~~~~~~~~~~~~~
Old Town Discovery 158 Canoe
Crappie.com 1K Star General
This is a very nice looking boat and I have fished out of a Grizzly Tracker and really like them and the open floor plan. I am just worried that I might not be happy with the 20 hp, I fish the Tenn River and sometimes run a good ways. If I knew how fast it would run it would give me something to think about. I currently have an old Lowe 16 x 48 with a 40 hp and it is plenty fast for me, but I am not sure how fast it runs. I have been wanting to upgrade to a 1754 Grizzly or 1756 G3 and was thinking 40 or 50 hp. I also fish out of a Kayak more than my boat so I some days wonder if I even need a boat. Definitely not interested in the big bass boat and gas bill that goes along with it, I have been there and done that, but I may be hunting more in the 40 to 60 hp range. I like your boat and have been trying to decide do I need to call and make a drive.
