Reply With Quote
Sent from my Pixel 6 Pro using Crappie.com Fishing mobile app
HaHa: 0
Founder Crappie.com Est.1996
Eff100 Crankshaft has shown itself...
And it don't look real good. The bearings are toast. I'm no expert, but the crankshaft itself might be serviceable. dono
The video should be available shortly:
I'll post a pic for those not on yoohoo directly
Owner
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
Founder Crappie.com Est.1996
Sent from my Pixel 6 Pro using Crappie.com Fishing mobile app
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
S10CHEVY LIKED above post
Founder Crappie.com Est.1996
Sent from my Pixel 6 Pro using Crappie.com Fishing mobile app
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
BuckeyeCrappie thanked you for this post
Founder Crappie.com Est.1996
Does the "void if removed" thing being partially melted like I think it looks indicate an overheat?
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
Crappie.com Legend
And the Prev. Owner said this was worked on how long ago??? Looks like it was ran with No oil, little oil for a bit. I call outboard abuse for sure...
Well one thing boss, it will be a near new motor when your done...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Crappie.com 2K Star General
I've never seen it but I build my own engines. Red Rhino in Mobile is a big rebuilder that turns out some good work. I have a account with them I will call tomorrow and see if I can get a answer as I will be interesting to know.Originally Posted by Slab
Super Moderator
* Crappie.com Supporter * Member Sponsor
Crankshaft looks decent to me…
“If your too busy to fish, you’re too busy!” Buddy Ebsen
PROUD MEMBER OF TEAM GEEZER
(Billbob and “G” approved!)
Proud member of Tekeum’s Jigs Pro
Staff
https://heavenornot.net/
heavenornot.net
Founder Crappie.com Est.1996
Can’t go any further, need some spline sockets to take off the rod bolts. More fun awaits. But I do feel accomplished today. Yay
Sent from my iPhone using Crappie.com Fishing mobile app
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
Crappie.com 2K Star General
12 point socket won't work? I have not split any 4-strokes but I use 12 points on the 2 strokes. That one Crank journal in the video looks toast. It would need quite a bit of polishing, doing it by hand enough to clean up would make it out of round.
Founder Crappie.com Est.1996
Didn’t try 12 pt socket. I guess I’ll try that. But figured I’d need spline socket to torque them down again anyway. They’re cheap enough.
And don’t know much about polishing journals, just a bit I seen on youtoob. Thought you only need to polish enough to take down any high spots. Dono
Sent from my iPhone using Crappie.com Fishing mobile app
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
Posting Permissions
