Thanks: 
Reply With QuoteWhat are you using to crank down the puller? I have found an impact wrench helps.
HaHa: 0
Founder Crappie.com Est.1996
I'm about to go to town on this flywheel! Wonder how much a new one costs. Maybe I look it up before I do!!!
"Snap-on Puller I have today and a massive Strap Wrench" Or maybe I needs one of them.
Owner
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
Super Moderator
* Crappie.com Supporter * Member Sponsor
What are you using to crank down the puller? I have found an impact wrench helps.
“If your too busy to fish, you’re too busy!” Buddy Ebsen
PROUD MEMBER OF TEAM GEEZER
(Billbob and “G” approved!)
Proud member of Tekeum’s Jigs Pro
Staff
https://heavenornot.net/
heavenornot.net
Crappie.com Legend
I Don't know about Kroil. I usually us PB blaster...May have to soak over night to penetrate enough...Don't know...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
Founder Crappie.com Est.1996
IMHO Kroil oil is slightly better then PB blaster. And I love PB Blaster.Originally Posted by BuckeyeCrappie
Impacting my little heart to death! Dang thing, bent it, stripped it, it's garbage. This was the final try, I had done the high tension mallet hits already, I was just going for it. Something was gonna break.
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
S10CHEVY LIKED above post
Super Moderator
* Crappie.com Supporter * Member Sponsor
Hmmm, what now boss?
“If your too busy to fish, you’re too busy!” Buddy Ebsen
PROUD MEMBER OF TEAM GEEZER
(Billbob and “G” approved!)
Proud member of Tekeum’s Jigs Pro
Staff
https://heavenornot.net/
heavenornot.net
Super Moderator
* Crappie.com Supporter
My buddies saying is “I’m just gonna go for it, I’m either gonna break it or fix it”
Founder Crappie.com Est.1996
Bigger Hammer! lol
I found higher quality pullers online, but they're at least a week out shipping wise. So I'm gonna drive around to some marinas tomorrow, maybe rural king too, and see what they got.
"Wear your PFD" "No texting n driving" slab
Crappie.com members are the best
Crappie.com 2K Star General
I'm going to weigh the hammer I use and post it in a few. It puts a whack on the puller. They do not come off as easy as one would think.
Crappie.com 2K Star General
So I weighed it and here is a picture, it's a NAPA 48oz Ball Peen
Now I ring the Puller Bolt pretty good sometimes 40-50 times before the Flywheels will Pop. When they do the more stubborn they are the more they want to fly. Best of Luck Bud, if you were closer I would pull it for you.
Crappie.com 2K Star General
