Might not be a problem Robert, as the higher you go in frequency the least likely you are to have the voltage spike's harmonics replicate in higher multiples.
1.2 MHz would be less susceptible to RFI because the PWM circuits operate at a much lower frequency IMO.
Time will tell!
Robert
Bringer of the 'Bird...
I agree, I've had a lot of issues with RFI on my Helix 12DI using anything over 455KHz.
I usually use 175-186KHz on 2D to avoid any noise.
But 1200KHz is an "odd" multiple so let's hope for the best.
I'm sure you'll have one long before I will, my budget is tapped out for the foreseeable future due to employer policy changes.
I'll keep playing the lottery though.
Robert
Bringer of the 'Bird...
There's no mega on the di units.most likely a di unit would be used at the bow ,with the transducer mounted on the trolling motor. (Could be the reason for there not being mega)
Yep - the Mega SI units are thought to have a dedicated DI element for all 3 MSI sizes, Rickie & I had a discussion about that.
It seems they have 2 different XDCRs listed on HB's site - but Rickie's contact said there's only one.
Doug Vahrenberg is supposed to get some MSI XDCR pics up soon.
Robert
Bringer of the 'Bird...
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Me too!