Ricky when I am selecting 455 it is listed as beam select. Then below that is the imaging frequency option.
Toofuss,my 597 has the 200/455 option for 2d.the 455 2d works on my unit while out on the water but doesn't show anything while in simaltor mold
I tried it again today on the water and I got a very weak return on bottom. Had to crank the sensitivity way up to get that
I agree with kosmo...try restore defaults....
If that doesn't change the issue....
Look under the Sonar tab for a setting called "Digital Depth Source"...change that setting from what it is and try again....
If it still doesn't change the issue...try swapping the xducers and test....
So are you getting a good bottom return (in both of the split panes)...as long as the "Beam Select" menu is set to 200kHz..??
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
No even when set to 200 that's all I'm getting. 455 is screwy no matter what settings I use
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Done it. Identical units front and back. Both act the same. The bow setup has a newer ducer due to me pinching the cable. You actually have the original. What's worse is I don't know how long its been like this. I just started trying to play with different freq in 2d. I got these units early last summer. I've got a buddy with a 597 on the bow. Might try his unit on my ducers and vice versa to see what happens.
Thanks, I am learning as I read.