Those beam angles you post all the time for the birds, do you happen to have any for the LSS 2. The reason I ask is Im trying to mount a LSS 2 ducer and 2D ducer To get the 2D to read depth on plane I have to mount the lss below that to clear beam. Its 1/2in from the bottom of boat. Im trying to figure out if the beams come out level on each side or at an angle down. When I had my 997 it was higher than the 2D on the other side and would leave a white line next to the boat center in side image. That wasnt a big deal It really didnt block any of the image. I would like to mount the LSS2 a little above the 2D ducer to keep from knocking off.

Thanks Wilbur