Search:

The boat is in Olive Branch MS

363 Ranger 88 boat with 98 Evinrude Intruder, 24 volt OMC trolling motor, Kumho trailer tires, new aerator pumps, Hamby bow protector, Ranger cover, Driftmaster pole holders, garage kept, Helix 5...

Get you some Kumho's. Only 14 inch D rated tire I could find. They look like new after two seasons.

I love all trollers. They stay out of my brushpiles .

Low voltage charge the battery

Best bet is to use the adapter to mount a transom to the trolling motor. Mine was a down imaging and was to long to use with the adapter on my motor. To swap to a trolling motor mount was $60 and...

The seal for the shift shaft seal also needs to be checked. Not sure if it will leak on Muffs.

Dual Pro like Cray said. They have come in Rangers for years.

I use weather.gov . Hit the map once at the lake location and then and then again when the map refreshes. You will have a forecast then for the location. Down at the bottom choose tabular...

I'm laughing at the size of the fish you cooked up JoeKiller. Did they have there eyes open yet ?

continuousWave: Whaler: Reference: VRO Fuel-Oil Mixing The attached link tells everything you every wanted to know about OMS (oil metering system) on OMC outboards. Very few failures occur...

The bottom of the second ramp is 249.4 . You should have plenty of water if you follow the creek and stay away from the gravel road to the Indian Mound.

Several things would bother me about using a will fit automotive filter on an outboard. What is the Micron rating of the filter ? To high or to low can be a problem. What is the relief valve...

The Coast guard sets the maximum horsepower by using different mathematical formulas (length x width) for different types of boats. The manufacturer can set a lower horsepower rating to satisfy the...

The level of the Mississippi river has everything to do with the level in the four reservoirs. The only place water can get into the Mississippi river is at Vicksburg through the Yazoo pass. If the...

I bought a tip for my 14' Ozarks from Grizzly yesterday. . Wade checked it with one of his inventory rods and it worked great when I got home. Might pay you with the older rods to go to the store...

If you are measuring the 6.5 volts after the relay I would be concerned about the relay ground or the relay. The 11.5 volts is also a problem to me. I would use jumper cables from one of your...

The last ones I saw were in Tunica right on 61. I will check the next time I go through town. I would not be pulling one behind a four wheeler. You will have a hole in no time.

You should have a breaker for each battery that need to be checked.

Looks like the poles are sold .

I am located in Olive Branch MS Shipping is not included in price. I do travel 9 states in the southeast (not the Carolinas) so delivery might be possible.

I have six 12 ft Pinnacle trolling rods. Like new condition. $65

I have six 12 ft Pinnacle Trolling Rods. Like new condition. $65 http://i1283.photobucket.com/albums/a560/aj306/DSC01103_zps02ca3bdc.jpg?1414205742076&1414205742304

My son got a $75 ticket last weekend from Mr. Green jeans for not having a life jacket on his vessel. He was floating the Hooch in Atlanta on an intertube. What a deal !!!

Most have fuses at the terminals . Make sure they are good and not corroded. Dual pro units are the best.

I agree with crappiewisdom you probably have a ground problem. I don't understand the green/brown wires. The green goes to the right light and serves as the brake and right turn light while the...

Cajun cooker is the best. I have 6 gal but I feel the 4 gal has better recovery and will almost cook as fast.

You would have to go with sea star system. The price of the bay star is nice but it will not steer a bass boat with 150 or higher hp engine.

I've ran mine both ways and hooked up is the way to go. Very few engine failures are due to the VRO and when they fail on the oil side they usually over oil. Most of the time one cylinder will fail...

With a 175 you should have dual cables. Disconnect both cables at the motor and make sure the motor will turn easily. If it doesn't the problem is the motor pivot and grease should correct that...