Search:

Unfortunately mine was installed correctly and the primer is just junk. As I sat there pumping away I was thinking how nice it would have been if I had just installed it wrong. I ended up just...

After some difficulty with my new primer bulb (Don't buy the Attwod primer at Wal-Mart!), I ended up having a good morning on Harris today. Caught about 30 or so in 14' of water 6-8' down around a...

I will remember that next time it happens (hopefully it does not). I took the boat out today and everything powered up fine. Thanks guys.

Brian

The batt. is hooked up correctly. I found another power cable and tried it on another battery and the unit started up just fine. I went back and messed with the connection on the boat and...

I have a Humminbird 570Di that I have had for about a year. It is fused and is never left on the boat. Recently I was unable to turn the unit on. I checked the power at the connection and it has...

The wife and I will be out there in my boat tomorrow. Hopefully we can get into some.

It wasn't bad yesterday (at the ramp). It was muddy with maybe 6-8'' of visibility. I too looked at the usgs gauges and thought it would be higher, muddier and faster than it was. The water was...

I fished the ramp for 2-3 hours and ended up with 2 WB. I had another hit but it got off before I could land it. One was about 13-14" and the other maybe 8".

Brian

Thanks! Hopefully I can get into some tomorrow.

Any idea how high/fast the Eno will be tomorrow with this recent rain? I would like to go tomorrow after a half day at work. I have an app on my phone that gives the flow and gauge height, but...

Well I didn't catch any white bass yesterday. It was windier than I expected and I only fished just down from the jump. I made the trip all the way to the tressel at Falls and it was really choppy...

How is the ramp at Red Mill? I am taking Friday off and planning on heading to the Eno for the first time. How far can you go upriver? Are there many hazards (shallow, rocks, trees etc?). Is it...

I plan on getting a windshield whenever AkMccallum has them back in stock. I added a 3-rod holder to the side of the console and a horizontal one on the passenger side. I used rod saver holders and...

If was kind of a pain to use, but then again, I didn't use their roller. I bought 2 different textured rollers from lowes that looked like the tuff coat ones. I had to thin it a good amount to get...

Thanks! Here is a before pic. This actually makes it look "decent." It really was in poor shape before. The floors and carpet were horrible. I replaced the wood with aluminum and covered in tuff...

First time out on Harris since I finished fixing up my boat. I fished from about 11-3 and managed 4 crappie, three dinks, one 13 incher and a stick. All were caught in ~30' of water 2-3 turns up...

I just fished there yesterday. I only fished a hour or so if that and was within eyesight of the 42 bride/ramp area. My overheat alarm went off as soon as I launched so I just trolled along the...

Trolling Motor Parts - Minnkota - Motor Guide - OMC

I have had to buy 2 bases and a couple other small parts and this is where I got them from. Good luck, hope you get everything fixed.

Nice! I caught my first steelhead last fall in OH (ODNR stocks eastern OH L. Erie Tribs). It was only 22" and a couple of pounds but it pulled line off my reel like nothing else I have ever caught....

thanks again. I had the top cover off earlier. There are 5 wires (2 are a larger gauge) that come in from the foot pedal and then go down the shaft between the rubber piece that the steering...

Nice job. I got skunked today at Jordan. I marked them all over around the bridge near Ebenezer, but couldnt get any to bite.

Thanks for the repair manual, that will come in handy.

By "looking good", I meant where I had to undo the connections under the cover when I replaced the base. They are still secure and in good...

Thanks for the quick reply. I just pulled the top cover and sure enough, I get my speeds back when I wiggle the wires. I actually broke the base 2 times and had to replace it. The connections are...

What would cause my Minn Kota All Terrain 65 24V to only have speeds 1-3, and not 4 and 5? Could the switch be bad? I thought maybe the batteries were going dead after the first time, but even...

Fished Harris late morning to early afternoon. Not a lot of traffic at all, and the few wakeboard boats that were out there were courteous, with the exception of one who must have been trying to see...

thanks. After searching Amazon was the cheapest. Got it for $289 shipped. Should be here next week

I am planning on getting a 570di pretty soon and was wondering if anyone knew who currently has the best price on them. I remember seeing them for like $263 before, but am not sure where that was or...

I also thought they only carried books and other items I wouldn't be interested in. They ended up having the cheapest prices on Moog ball joints and tie rods for my truck, plus the shipping was...

Whoops, messed up the title. It should be 7/16 and 7/17.

Fished Saturday and Sunday mornings (not out there as early as I wanted). Both days caught maybe a couple dozen crappie around submerged trees. I was fishing minnows on homemade capps/coleman style...