Search:

Hope it's Ok to post this link... This explains it pretty well...

https://www.youtube.com/watch?v=vhUYKEFagm8

Here is a photo taken on Saturday 5-16-15. It's hard to make out the measurements embedded in the concrete, but I marked the 608' mark with an arrow. My son, standing in the photo, is about 5'...

Those are fun to catch, but an exercise in frustration when cleaning!

After you soak up the oil, spray some brake cleaner on the concrete to get the stain out. Jus make sure you have ventilation... can't guarantee it will get all of it out but it worked for me...

In.

In.

In.

You might check out Robber's Cave state park in Wilburton, also. Super nice and clean, and it's about the same distance from there to Hickory point as McAlester would be. Robber's cave has plenty...

I wonder if you can get an inverter with a GFCI built in. Something about 110v around water makes me nervous...

Fished around the Crowder area yesterday evening with my 7 year old. On the water for about 2.5 hours and caught 3 keepers. Pulling jigs in 5 to 8 fow. Caught about 10 that weren't much bigger...

If you are near an Academy Sports store, I am just about positive they carry the American Angler knives. I'm pretty sure I saw them last time I was in OKC.

I've got a XPress bay boat that I am really satisfied with. The Hyperlift hull on the XPress is nice riding.

However... Lowe just came out with a center console aluminum bay boat.that looks...

I only mentioned the Southern Pro weed guards because the original post said he was looking for colored weed guards to add to his jigs. I use the Eagle Claw, but as far as I know they only come in...

Southern Pro Tackle is another source of these, and they make them in 5 different colors. I don't think they are available in different sizes though. I haven't ordered any yet, so I can't comment...

My family and I will be heading to Wister next weekend, and staying in the cabins as well. We went last year, and due to wind just stayed in the cove by the launch and fished there.

I was...

I would check out the Hambys Light version. I put one on a XPress bay boat and I am more than impressed. It is thicker than the others and can be self installed. I did take the paint off prior to...

I saw a commercial for them on TV yesterday. Looks like if you are filleting 13" or bigger fish and all you care about is speed it might be ok. Sure looked to me like he was wasting meat for the...

You can also put ice cubes in the bags with the fillets before vacuuming out the air. Then let them melt before putting in the freezer. This way the fillets are in water with no air. Seems to be...

I lived in North Dakota for 13 LONG winters, and figured out a few things about cold weather survival :).

As far as boots, I would recommend something made by Baffin or similar. They are made in...

Just get a pack of "ball bungees". They are a loop of bungee cord with a plastic ball on the end. I have one of these strapped around my 898 and the cover stays on no problem.

Sent from my...

Check out the link below. I am leaning towards putting some of this on the decks of my aluminum bay boat which has spray-in bed liner material in it now. It is non-slip, and also is cushioned.
...

Usually the five wire plug is for a trailer with brakes. Do you have surge brakes on the trailer? On mine the extra wire activates a bypass so you can back the trailer up without the surge brakes...

And make sure the fuse is close to the battery! Found that out the hard way years ago...

Sent from my Galaxy Tab 2 using Tapatalk 2

Not sure what type of connectors you used, but if they are crimp type I would seriously consider soldering them and then coating them with liquid electrical tape. I had all sorts of of weird...

If this heat and lack of moisture continues, might not need a boat... Just build 'em on dry land and wait for the lake to come back up. :)

-Scott

Sent from my Galaxy Tab 2 using Tapatalk 2

I've got a H22B with a Yamaha 150 that I've had since February. So far I love it. The fit and finish isn't the same as a fiberglass, but I knew that going into it... The HxxB series have the...

Forgot to add that I ran seperate wires for both units with inline fuses at the battery. I soldered and heat shrinked all the connectors and splices and then coated with liquid electrical tape... ...

Check your ground also. I fought with my 898 and 570 getting low voltage when cranking. I ended up running a heavier gauge wire for both the power and ground directly to the cranking battery. I...

I will be down at Lake of the Pines second week of June, staying in the Alley Creek area. Just needing some advice on the go to jig types, weights, and colors for LOP in the summer.

Also,...

I think the newer cards are also able to be updated with freshest data available from Navionics online for a small fee each year. My 2010 was made just before this became available and I would be...