Nice work. Rebuilds are fun to do.
Sent from my SM-G960U using Crappie.com Fishing mobile app
After many years of flawless service I had to give it a facelift. 6’6” in 2 piece and medium action with a soft tip that throws a 1/16 forever. Hands down my favorite utility rod for many species. The finish was separating from the windings and the cone front of the reel seat had been cracked and repaired 3 times, if memory serves. In removing the guides I found that it had been primed and colored. The porous nature of the blank means it will never be perfect and I didn’t remove the primer and color from the ferrule area or it would have seated deeper. I guess you’d say it has a personality. A 220 sanding sponge allowed me to lay it on the workbench and sand without creating flat spots. Tedious. Last weekend I put the handle and reelseat went on and what I’ve used as my signature wrap and coating went on today. High mounted guides but not torzite will go on soon. Here’s the pics and thanks for watching...... Skeet
The bottom rod is the 6’ ultra light I finished last year. Had to get it out to get the thread count for the chevron wrap, which were done on 3/4” centers on the UL and 1/2” on the medium. I like the top one better, what do you think?
Creativity is just intelligence fooling around
Nice work. Rebuilds are fun to do.
Sent from my SM-G960U using Crappie.com Fishing mobile app
Good looking rebuild
The love for fishing is one of the best gifts you can pass along
You'll have to post a before and after if you have any pictures of it before you started. Looks great so far.
Very nice skeet.
"Just Like Iron Sharpens Iron... So it is that One Man Sharpens Another Man." Proverbs 27:17
Looks of skill time and craftsmanship.
The love for fishing is one of the best gifts you can pass along
Nice job.
Pass the "Sportsman Baton" on before you're gone, promote values for others to hunt and fish upon.
Thanks everyone and Jeff, I know I need a before and after pic. I got excited knowing what it was going to look like that I had it stripped before I even thought about the pic. Second time I’ve done that. Pretty much none of the guides had any coating on them that was yellow and separated from the thread it was supposed to be protecting. The handle had a conical cork forend that was the adjustable part of the reel seat. When it was built there was no gap between the blank and the cork, with the cork being pretty thin. It broke a couple of times and I finally opened the hole to allow movement of the blank and the issue was done. But it had three epoxy repairs by then and looked bad. Looks and fishes great now and I think it may even cast some better. I promise, before pics next time.
Creativity is just intelligence fooling around
Nice work Tim
I have spent most my life fishing........the rest I wasted.
PROUD MEMBER OF TEAM GEEZER
PICO Lures Field Rep