Try using more heat and just one quick flicker in the powder. Try not to dunk it or push it in, rather jingle it about. If the head is hot enough there should be no double dip necessary.
Still fairly new at this powder painting. What am I doing wrong? I heat the jigs then dip in the paint and it’s like the first dip doesn’t take and I have to re-dip them to get coverage, then it’s like they all have to much paint. I’m guessing it’s a heat issue.
Boy powder painting is messy, it’s quicker but makes bigger mess then fingernail polish.
Try using more heat and just one quick flicker in the powder. Try not to dunk it or push it in, rather jingle it about. If the head is hot enough there should be no double dip necessary.
Maybe they will bite this one……SuperDave336, GrumpyLoomis LIKED above post
Are you using a fluid bed?
Looks like more heat is needed and less dipping. Make sure your jig heads are clean also.
2018 G3 Sportsman 17
2018 Yamaha F90 four stroke
Ultra 106sv bow/console
Livescope Terrova 24v Ionic lithium batteriesSuperDave336 LIKED above post
Did you cast the heads or buy them?
Try wiping with alcohol or acetone before heating dipping.
Sent from my iPhone using Crappie.com Fishing mobile app
Proud Member of Team Geezer!SuperDave336 LIKED above post
Yes I’m using a fluid bed. Yes I purchased them. I was wondering if something was on them. I will try cleaning and more heat before dipping next time
GrumpyLoomis LIKED above post
Not sure if this is cause, but even if you have a fluid bed. After doing a few jig it's possible to pack the powder down. Stirring the powder to loosen up the paint will help.
The best thing my dad ever gave me was his love of fishing.SuperDave336 LIKED above post
Dave when people pour their heads they will coat the mold with talc or baby powder. I think that causes the pits your are seeing.
SuperDave336 LIKED above post
I’m gonna try cleaning them first next time. I’m thinking this is probably the culprit. I’ve played with the heat, even melted them....lol. Thanks
Dave, I know you’re no rookie, but for the heat I use it like this. I hold the hook iby the shank and start to count, usually to 4, then flip and do the same thing on the other side. By this time I can feel the heat coming up the shank of the hook and I grab them in a pair of bent tip, spring loaded needle nose pliers and go thru the paint. That’s usually enough heat for enough paint to bond, then I reheat and glaze the paint, usually a 2 count, then set them aside for the oven. Usually does the job for me, and under 1/32 heats faster and the heat in the shank tells you when to quit.
Creativity is just intelligence fooling aroundJamesdean, SuperDave336 LIKED above post
If you figure it out let me know. I bought some jigs and when I painted them did the same thing in the same color. I posted here and tried everything that was suggested. No help. Stir paint more heat less heat clean head with alcohol no help lol I gave up. Good luck I hope you figure it out.
Sent from my iPhone using Crappie.com Fishing mobile app
SuperDave336 LIKED above post