GFCI Receptacle Tester Klein Tools RT210 GFCI Receptacle Tester Klein Tools RT210 - - Amazon.com
Well worth $10 to test outlets quickly.
Sent from my iPhone using Crappie.com Fishing mobile app
Take it and plug it into a outlet inside your home to see if it shocks you. Will save a lot of aggravation and you will know if it is the pot or your shops wiring.
PROUD MEMBER OF TEAM GEEZER ---------
Ascend 133X 13' - MotorGuide Xi3 & Mercury 4Brimfisher thanked you for this post
GFCI Receptacle Tester Klein Tools RT210 GFCI Receptacle Tester Klein Tools RT210 - - Amazon.com
Well worth $10 to test outlets quickly.
Sent from my iPhone using Crappie.com Fishing mobile app
Ericskeetbum LIKED above postBrimfisher thanked you for this post
I did that and the lot did not shock me. I talked to an electrician friend of mine, and he suggested that I put an earth ground directly to the building and not rely on the ground from the house.
Sent from my SM-J100VPP using Crappie.com Fishing mobile app
Create Memories Worth Repeating, Go Fishing With Your Dad.
www.brimfisherjigs.com
Since your house outlet appears to be safe from your testing
Question on your main panel:
Is it a 200 amp equipped with a separate ground bar attached to two ground rods sunk outside the house ?
also are you running your sub panel off a 50amp or more breaker with at least a 12 - 2 burial wire
Trying not to confuse you, just being safe
on your wiring to the sub panel I take it you ran the:
blk wire to the breaker the white to the neutral bar and the copper bare wire to the ground bar?
Your Election is right about sinking a separate ground rod for your sub box
for you might be getting a little feed back on the neutral side
Brimfisher thanked you for this post
I did run 10-2 to the shop. I am going to put a separate earth ground for the shop, but we found out that the coil in the pot is bad and is causing the grounding issue. New pot ordered. I'm the mean time I cleaned the pot I use for tin jigs and am using it. No problems.
Thanks for all the help and advice with this problem. Y'all rock.
Sent from my SM-J100VPP using Crappie.com Fishing mobile app
Create Memories Worth Repeating, Go Fishing With Your Dad.
www.brimfisherjigs.com
Here is a whole lot cheaper alternative to new pot.
New Heater 500w120v - Lee Precision
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
I have been through that many times and it's always the element you can buy replacement parts here
Lee Melters Parts
For a full line of soft plastics, jig heads,
jigging and casting rods, fluid beds and more see us at
www.simplycrappie.com
http://stores.ebay.com/Simply-Crappie