Why are there so many weight differences? I checked (3) 3/32 jigs from (3) different places yesterday. None of the (3) were close to the advertised weight. All were lighter..
Just wondering
Why are there so many weight differences? I checked (3) 3/32 jigs from (3) different places yesterday. None of the (3) were close to the advertised weight. All were lighter..
Just wondering
USS Intrepid CVS-11 Helicopter Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good day
Could be the inaccurate tooling of the dies ... could be the difference in lead composition ... could be the different hook weights ... could be the industry standard only requires they get within a range (if there even is a standard)
But ... IMHO ... the sink rate difference would be negligible between a true 3/32oz and one slightly heavier or lighter.
This is what I found::
3/32 oz = 41.0 grains
Jig #1 was 31.9
Jig #2 was 34.0
Jig #3 was 32.2
An approximate 25% variation from the advertised weight
At this weight difference if someone asked what oz jig you were using, you would have to answer, "I don't know"
USS Intrepid CVS-11 Helicopter Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good day
Crooks.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Don my chart is in grams,
1/16=1.77
3/32=2.6
1/8=3.54
I weighed the jig in the 3/32 oz jigs I have with a #2 hook and it came out as 2.2
I know when I worked on my mold they were coming out as 2.5 grams. The only difference in my pouring now is different lead so it has to be in the lead mix content.
So if I cut my mold to be a 2.6 gram jig with my lead I have now and my next lead content is not the same the mold will be off again.
This is the reason I don't pour or sale jigheads. No way to get the weight just right.
I will gladly give you a refund on the ones you received from me as I always try to give a man what he ask for.
Sent from my iPhone using Crappie.com
Last edited by STUMP HUNTER; 08-18-2017 at 09:36 AM.
PROUD MEMBER OF TEAM GEEZER ---------
Ascend 133X 13' - MotorGuide Xi3 & Mercury 4
Ronnie, we measured jigs that we had from the old buck tail tying days..No idea what yours weigh but I do know the speed of drop. I will take them back to my friends gun shop scales and see how they compare. In fact, Doris just walked in with the jigs from SC. A day early..Thanks
No,no, no you don't get these back..The color we talked about is perfect & I have had these before except for the hook size, so I know what they will do.
Please don't get the idea that I am not happy with yours....That won't happen.
I now am really curious as to what they do weigh, so I will run them by Chris' this afternoon.
For info purposes, I will post our findings later this evening.
USS Intrepid CVS-11 Helicopter Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good day
Slider jigs were notorious for being heavier than advertised (sometimes, twice as heavy.) Obviously, they are not the only ones.
I don't this this is just true for jigs. I've been saying for years now that line "pound tests" are inaccurate. Whatever line you're using, you can be almost 100% certain it's stronger than what the label on the box says. Most 2# line is really 4#, most 4# is really 6#, etc.
Don I only have some with a #2 hook and they were the ones I weighed. I'm sure the smaller hooks will have less weight. As soon as I get the next order of hooks I'm pouring me some of the same
Sent from my iPhone using Crappie.com
PROUD MEMBER OF TEAM GEEZER ---------
Ascend 133X 13' - MotorGuide Xi3 & Mercury 4
USS Intrepid CVS-11 Helicopter Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good daySTUMP HUNTER LIKED above post
You better believe I do
Sent from my iPhone using Crappie.com
PROUD MEMBER OF TEAM GEEZER ---------
Ascend 133X 13' - MotorGuide Xi3 & Mercury 4