LivetoFishRogerA LIKED above post
I the biggest killer of trailer tires is axle alignment. I know that mine will creep 1/4 - 1/2" from hitting holes in boat ramps, potholes, and all of the other stuff that trailers hit going down the road. For many trailers, you can align in the driveway by removing the tires, jacking up the trailer, loosening U bolts and lining up the difference between the hub spindle to the hitch. It doesn't take too long and will definitely make a difference minimizing tire wear. I have found that very few shops will align a trailer and I don't know what is involved with fancier or newer rigs.
Speck, BigRiverMarine LIKED above postSpeckledSlab thanked you for this post
This is the culprit on most trailers with excessive tire wear. Bent axles are a major cause also. With good axles and alignment, you should get many years of heavy use from a set of radial TRAILER tires. D or E rated tires only on a trailer. C or below car tires won’t do as well.
Sent from my iPhone using Tapatalk
We only sell the Best. Ranger, Xpress, Yamaha, Suzuki, Tohatsu.RogerA LIKED above post
I noticed yesterday that on one side of my single axle the tire is wearing a little more on the inside of the tire than it is across the whole tread. Not much, but a little, indicating to me that that the axle may be bent up a little. I wondered who or where I could accurately get that checked out and or straightened?
Bobby McGaha
3250 Harrison St. Ste. 300
Batesville, AR 72501
870-612-5300
Securities offered through First Allied Securities, Inc., A Registered Broker/Dealer. Member FINRA/SIPC. Advisory services offered through First Allied Advisory Services, Inc. A Registered Investment Adviser.
Lots of good information here...My Skeeter uses an odd wheel/radial tire size that is hard to locate.Last few sets bought from an outfit called etrailer. They have a huge selection of every size known to man and ship at reasonable cost....Might take a look