Would some of you mind sharing by way of pics your installation of a water/separator? Just trying to get some ideas. Thanks
Would some of you mind sharing by way of pics your installation of a water/separator? Just trying to get some ideas. Thanks
You can't finish what you don't start
Mine on my Ranger is mounted on one of transom braces. I have seen most the bilige of boats. They are not real hard to install. I would just make sure it will be pretty easy to get to for replacement, and I would put it near a place you will be putting things in and out so it doesn't get hit by something. There are a couple of trackers on page 1 or 2 maybe 3 by now on the main forum with some good pics of their seperators. Check them out...sorry I don't have any pics. If you have any questions please ask. What kind of boat is it going on??
"But if serving the Lord seems undesirable to you, then choose for yourselves this day whom you will serve, whether the gods your ancestors served beyond the Euphrates, or the gods of the Amorites, in whose land you are living. But as for me and my household, we will serve the Lord.” Joshua 25:15
Here's the thread Scrapper was referring to:
http://www.crappie.com/crappie/main-...2-tracker.html
Downwind just make sure you have clearance to remove the element. Don't want to sound demeaning or nuthin' but lookin' at PanMan's pics it looks really close. Apologies if I offened anyone.
Life has many choices, eternity has two...choose wisely.
Unapplied biblical truth is like unapplied paint...how many gallons do you have sittin' around? U.D.
Thanks for the reply! Going on a Tracker 185. The easy to get to part is the problem. They sure pack everything in these Trackers not leaving much room to mount anything additional!
You can't finish what you don't start
heres mine, quick and easy install
It is crowded below deck so I installed the separator in the splash well where it is easy to get to.
Keith
2008 NWR Bash Crappie Champion
2010 NWR Bash Yellow Perch Champion
2010 Buggs Bash Smallest Crappie Award
That's what I was looking for. ????What are the connectors that I will need to hook this thing up with, and where might I purchase them. Kit came with the mounting bracket and filter.
You can't finish what you don't start
I used two 3/8 x 3/8 barbed connections
Midland Metal - Brass Fittings, Valves, Hose Clamps and Accessories for Hose, Pipe and Tube.
Two brass plugs
Midland Metal - Brass Fittings, Valves, Hose Clamps and Accessories for Hose, Pipe and Tube.
Add two small hose clamps, two screws for mounting, and some teflon tape.
All this can be picked up at the hardware store. Got mine at Ace
TinBoats.net
The original aluminum boat fishing club!
All of this is starting to make sense. I really do appreciate the help!!
Last edited by Downwind; 01-15-2009 at 10:20 AM.
You can't finish what you don't start
PanMan--Where did you get that mounting piece? Make it? I'm going to have to raise my mount up some.
You can't finish what you don't start