Thanks: 
HaHa: 
Reply With QuoteThere is a thread on here about that spring. Not sure where but the search bar may take you to it. I remember reading about it. It gave a part number for McMaster Carr but I can't remember it. I have a XI5. The spring in it is way too stiff.
Crappie.com 1K Star General
Xi5 foot control springs
Anyone replace the springs in the xi5 foot pedal and how did it work out for ya?
TIA
If I dont ask its my fault for not knowing
Crappie.com 2K Star General
There is a thread on here about that spring. Not sure where but the search bar may take you to it. I remember reading about it. It gave a part number for McMaster Carr but I can't remember it. I have a XI5. The spring in it is way too stiff.
Crappie.com 2K Star General
Found it. McMaster Carr compression spring part number 9002t31.
Crappie.com 1K Star General
I ordered those springs and they are way too soft so I went to a hardware store and found one to replace them although it’s not stainless it’s a happy medium
If I dont ask its my fault for not knowing
Crappie.com 1K Star General
I ordered those springs and they are way too soft so I went to a hardware store and found one to replace them although it’s not stainless it’s a happy medium
If I dont ask its my fault for not knowing
Crappie.com 2K Star General
Xi5 springs
Do you have a part number and which hardware store if you don't mind sharing. Just for future reference Thanks
Last edited by Dollfly; 04-19-2023 at 05:29 AM. Reason: Correction
fe1 LIKED above post
Crappie.com 1K Star General
It was Ace hardware store. It was the same diameter coil but different length.A little longer and heavier wire than the McMaster springs but smaller than the factory springs.
I took the other springs with me for comparison.
If I dont ask its my fault for not knowing
Crappie.com 2K Star General
Thanks for the info.
