Came home from drill this evening and figured I would give it another shot at this vro situation that I am being faced with. All the instructions that are read say that you can still retain the overheat alarm circuit when you disconnect the oil tank and the vro connection. With everything disconnected and oil mixed in the tank I started the engine and I get a long steady tone from the horn for about 30 seconds. This is all while the engine is cold. The temperature light is remaining on on the system check gauge and when I tried putting a meter on it I'm getting continuity with negative on the Block and positive probe in the engine side connector but when I flip and put negative to block positive to engine side connector I have nothing. I did notice that one side of the motor has a single brown wire the other side has a brown and white with black stripe. I disconnected both wires but I'm still getting the light on the dash and the horn sounds when starting

Sent from my SM-S205DL using Tapatalk