Thanks:
0
HaHa:
0
-
The small brass tube that runs from the bottom of the carb, through the middle of the carb intake and into the top of the carb carries the fuel used for idle and off idle. With the bowl off and the top cover off, remove the idle mix screw and look down that tube from the top. If it's clear, reassemble the carb and set the idle mix screw to 1 3/4 turns out from a lightly seated position.
I'd rather be fishing.
-
Did that and every thing is clear. The 3 holes that feed fuel to throttle bore are open also.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
BACK TO TOP