Likes: 0
Thanks: 0
HaHa: 0
Crappie.com 1K Star General
* Crappie.com Supporter
Transom Saver Needed
Looking for a transom saver that will fit my trailer with a 75hp Evinrude. I have the lights on trailer and the top of trailer support is not flat and is dished out where I'm thinking a 90 angle brace won't work on the top. Bottom clearance on trailer is only 7'' so was thinking bracket mounted on under side would not work either. Looking for advise, thanks.
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
This is mounted using 2 tabs about 1/4 in thick 1 1/2 wide and about 4 in long. Welded to cross member and that metal light bar mounted underneath. No problem seeing lights going down road under roller. Got about same bend yours has.
Sent from my iPhone using Tapatalk Pro
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com 2K Star General
What about one of the non trailer touching units? Motor mate, lock-n-haul, etc?
Drinkin coffee, missin fish.
Trophy King II
You could make a bracket that bridges the light and use the square socket end mount.
Reply With Quote