Reply With QuoteDel City electrical
Likes: 0
Thanks: 0
HaHa: 0
Crappie Wall Hanger II
* Crappie.com Supporter
Electrical switch panel needed
Looking for a quality , waterproof rocker or toggle switch panel to add to a tiller handle aluminum boat for lights , bilge pump , etc. Will likely mount it in transom area. Approximatly 4 gang w/fuses. 12v outlet, and remote tilt switch a plus . Thanks.
Crappie.com Legend
* Crappie.com Supporter
Del City electrical
Crappie.com Legend
Crappie.com Legend
Check out marine waterproof switch panels on ebay.
Be safe and good luck fishing
Crappie Wall Hanger II
* Crappie.com Supporter
Originally Posted by scrat
Check out marine waterproof switch panels on ebay.
I dont see any gang type switches at Del City, overtons , and eBay products look cheap.
Super Mod and 2014 Crappie.com Man of the Year
* Crappie.com Supporter
Check with Canepole. He may have a source.
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
I build my own. Here is a picture of one of the control boxes on my pondtoon. The box is an outdoor elecrtical junction box I got at Lowes or Home Depot. It is a gasket sealed box. It is 6x6x4. Just rite for mounting cig lighters and rocker switches. I got the Carling pre labeled rocker switches, but toggles with a rubber boot are much easier to mount and are easier to seal (waterproof) against leaks. You can get marine switch stick on labels if you wanna label switches.
You can get other size waterproof boxes from companies such as Poly Case or Bud Box. I use wood bits to drill round holes in the plastic boxes. Works great. I drill, dremel and file rectangular holes for the rocker switches (a real pain but they look good).
I have one of these boxes (as seen in the pic) on each side of my pondtoon. They have a c.com fishie on them and the don't look cheesie.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie Wall Hanger II
* Crappie.com Supporter
I build my own. Here is a picture of one of the control boxes on my pondtoon. The box is an outdoor elecrtical junction box I got at Lowes or Home Depot. It is a gasket sealed box. It is 6x6x4. Just rite for mounting cig lighters and rocker switches. I got the Carling pre labeled rocker switches, but toggles with a rubber boot are much easier to mount and are easier to seal (waterproof) against leaks. You can get marine switch stick on labels if you wanna label switches.
You can get other size waterproof boxes from companies such as Poly Case or Bud Box. I use wood bits to drill round holes in the plastic boxes. Works great. I drill, dremel and file rectangular holes for the rocker switches (a real pain but they look good).
I have one of these boxes (as seen in the pic) on each side of my pondtoon. They have a c.com fishie on them and the don't look cheesie.
thanks for the help guys. Going to go by a War Eagle dealer this week and see what their putting in them from the factory.
