Reply With QuoteProbably wont start seeing it pee until the thermostats open up. Dont turn the hose wide open only half to 3/4
And dont rev it up, just let it idle
Likes: 0
Thanks: 0
HaHa: 0
Crappie Wall Hanger II
The impeller and gaskets should not run you over $35. They are easy to install yourself. The hardest thing is getting the shifting linkage and speedo tube back in place. If it is over 2 years that you had it replaced I would spend the money now. Mercs idle at about 5 to 7psi. Have you thought about installing a water pressure gauge? They are not that expensive and you can also tell the thermostats and poppet valve are working properly. If you fish around weeds, it could be the cheapest item to have on the boat.
Crappie Wall Hanger II
Probably wont start seeing it pee until the thermostats open up. Dont turn the hose wide open only half to 3/4
And dont rev it up, just let it idle
Crappie.com 1K Star General
Merc says when running enough water to jusr produce a leak around the muffs. Also NEVER REV YOUR MOTOR ABOVE 1500rpm's ON THE MUFFS. It's gonna take a while if its cold
All lakes raise a foot when I step in the boat
Posting Permissions
