Likes: 0
Thanks: 0
HaHa: 0
Crappie Wall Hanger II
My 2 cts worth............. I`ve got a "Sea Nymph" 16 ft with a 40 Suzuki........ too much weight on the transom , porpoise`s when I am alone , have to trim all the way in with a passenger....... just about impossible to run it when I am alone , not fun !
also looks like your motor sitting too low, some info
Pat
installing an Outboard to the Boat Transom from Mercury Outboard Rigging technical manual 3rd edition
Slabmaster
Motor is for sure low....looking at pic I'd guess 6" or better. Smaller # pitch for holeshot. Too low will allow engine to rev over redline. I have had great with 4 blade ss props. Used to run one on a 200 Rude/20' Startos...my avatar image actually.
Slabmaster
STRATOS that is.
Slabmaster II
13 pitch is too much. as stated four blades are the way to go id say about a 10 if you fish with buddies maybe 11 if you fish alone also after market tilt and trim units help with angle ang give some set back and height adjustment.
ITS LIKE BASEBALL PITCHIN,HITTIN,CATCHIN
Super Duper Moderator - 2012 Crappie.Com Man of the year & 2018 Crappie.com Decade of Exceptional Service Awards
* Crappie.com Supporter * Member Sponsor
Your motor is way too low.
I have spent most my life fishing........the rest I wasted.
PROUD MEMBER OF TEAM GEEZER
PICO Lures Field Rep
Slabmaster II
OK went out and checked height of motor this morning. I have been wrong many, many times in my 56 yearsI always thought cavitation plate to bottom of the boat to be level or just a little lower but not higher than the bottom of the boat. Looks less than 2" lower, is this right? and would that have much effect?
Super Duper Moderator - 2012 Crappie.Com Man of the year & 2018 Crappie.com Decade of Exceptional Service Awards
* Crappie.com Supporter * Member Sponsor
Sorry.....it just did not look that close in the other pictures. I raised my motor up one set of bolt holes ( about 1 inch ).....I gained 4 mph and come out of the hole a lot better now.
I have spent most my life fishing........the rest I wasted.
PROUD MEMBER OF TEAM GEEZER
PICO Lures Field Rep
Slabmaster II
Hey you don't have to be sorry, I'm here to learn and get help. And I thank everyone who has input and trying to help me. Great bunch of guy on here!
I also own same year of motor only mine with power trim. I can tell you from my experiences to drop to the 9.5 pitch prop Mercury offers for this motor. And from the pictures, you need to raise one set of holes on motor height. Hope this helps!
Slabmaster
Get your cavitation plate even with the bottom of your boat and see what happens. I really suggest getting a tach so you can see how far off of top rpm's you are. That would give you a better idea of what pitch prop you need if raising the motor doesn't help.
Posting Permissions
Reply With Quote
