Just adding foam wont do it, you need larger toons or start removing wood
i'm making a small 12' trolling motor only, boat. the pontoons are foam filled. i had to add a 37"x 96"x 10" plastic coated foam block (about 1000lbs more bouyancy) in the back 2/3's to increase the flotation. now, with 4 batteries and me in the boat, i've got about 4" between the water level and the deck. the front remains at about the water level. the boat is obviously too heavy and needs more flotation, as well as less weight. my question is, if you look at the pictures, especially the front, is the upswept, pointed shape of the pontoons so limited in their carrying capacity that no matter how much weight i remove i'm still going to suffer from the same problem? i want to be able to fish 2 people. i have limited space on either side of the trailer runners to add more foam.
Just adding foam wont do it, you need larger toons or start removing wood
i definitely underestimated the weight of the lumber. bigger toons aren't in the cards. i'm wonderin' how good i can do by removing wood.
take the wood off and replace it with wire fencing or straps ????
Too big and too heavy for the pontoons that you have. Narrow it down and lighten it up....use aluminum where ever you can.
I have spent most my life fishing........the rest I wasted.
PROUD MEMBER OF TEAM GEEZER
PICO Lures Field Rep
i'm going to take the boxes off and see how much difference that makes before going the narrowing/aluminum route. i really want a wide platform if possible.
looks good if you can get ride high up 4 to 6 more inc it will be a killer toon go all the way and put small 5hp hand tiller on it did you make the toons for it
team member
of the 2011 winners of the c.d.c. lake hartwell fall fest
It's actually pretty easy to estimate how much boat you can float with pontoons.
As an example, a 1ft diameter pontoon 10ft long has a volume of about 8 cubic feet. For two pontoons you double that so you have a volume of 16 cubic feet for the pair.
Now say you want the pontoons to ride half in the water. That means you want to displace half the volume of the pontoons in water or 8 cubic feet. 8 cubic feet of water weighs 8 X 62.42796lbs or right at 500 lbs.
That means if everything on the boat weighs 500 lbs, including the pontoons and fishermen, you'll float with the pontoons half in and half out.
You can do the same calculation with your pontoons before you start changing things to try it out. Probably better to just measure the portion of the pontoons that are full diameter to give a little margin for safety.
If you aren't mathematically inclined, post your measurements and I (or somebody else) will figure what you have to work with.
Foam is only useful if the boat is sinking. Otherwise it is just weight that pulls the boat down. You want air in the pontoons.