Quote Originally Posted by tool
Thanks for the advise. I had my boat in the shop 2 times because the pump kept getting clogged so that added the screen. On the year model tracker i have the pump and the drain come in and out the same hole. I would like to make it a mechanical connection, but the intake is not threaded and knowing my luck, if i cut a screen just large enough to fit over the hole, it would end up getting sucked into the pump somehow and shorting the pump again.
(Tool);; I took a 1/2 cpvc hot-n-cold cap, Drill about six 1/32 holes in it, I had to sand the outside down just a little bit slid right up in the hole. As for the glue part moos has that covered. LOL