Garmin Force trolling motor

[Brag]

I run a Terrova with a Lowrance HDS 7 gen3 hooked to it with the adapter cord. The way I understood it is you can only get 2D imaging and I don't think you can control the trolling motor with the Lowrance either. The trolling motor I bought only had the 2D sonar built in for this reason.

Sent from my SM-S906U using Crappie.com mobile app

That very well may be true. My sonar is an older unit and I only use it for mapping and 2D sonar on the bow, though I think it does have downscan as well. Since I'm adding a new unit specifically for Active Target, I don't really need it for anything else. Good catch though and I didn't wish to give bad info.

[BON TEMPS]

I run an Ultrex with my built in transducer hooked up to all my Garmin screens. It only required an adapter cord which was about $20.

Bon Temps!!

[Curlytail]

I run an Ultrex with my built in transducer hooked up to all my Garmin screens. It only required an adapter cord which was about $20.

Bon Temps!!

Can you mark waypoints on your Garmins & then track to them with you Utrex.

Sent from my SM-S908U using Crappie.com mobile app

[BON TEMPS]

I have always used my Garmin electronics to mark my way points so I can’t give a definitive answer. My Garmin package came with a 56 transducer. I also have Livescope on the bow. I mark the spots with both when I want my trolling motor to bring me back to a certain spot.
I have marked spots with my Ultrex remote control and let the trolling motor bring me to the spot from quite a long distance however. I’d call Garmin Tech support for the answer to your questions.

Bon Temps!!

[Rammer1961]

Can you mark waypoints on your Garmins & then track to them with you Utrex.

Sent from my SM-S908U using Crappie.com mobile app

Marking waypoints with a Garmin unit will only work and track with the Garmin Force TM. The 2D Transducer on the MK Ultrex will interface to compatible Garmin graphs using an adapter cable.

[mozingo1952]

Just installed a Force Kracken, with two new Garmin 126 ultras. Just got everything connected and so far I love it,
Due to the long shaft length , the Kracken is not for everyone, but works well on my boat ( 22 ft Center Console).

Be happy to answer any questions

Mo

[Centurion]

Been running my Kraken since just before Thanksgiving. It is a GREAT trolling motor. Mine is on a Lund Impact.