Crappie Magnet - Eye Hole Jigs

[SuperDave336]

Excited to have Crappie Magnet as a site sponsor so placed another order when the Eye Hole jigs were available. My buddy and I split an order to get some of these jigs to try.



I was especially interested in the Hammer Heads which were designed by accomplished tournament angler Brandon Smith. This head has flat wider surfaces that holds more scent as well as gives a better return for forward facing sonar users. I took some comparison pics to show the difference between normal ball head jigs and the hammer heads. Both 1/16 and 1/8 sizes.



Slab mentioned adding sponge in the hole to use Slab Sauce and I had the idea of a wash mitten. Was a bit of a challenge but possible to run it through the hole.



I can’t wait to use these jigs. Either with nibbles or sponge soaked with sauce I think these are going to work nicely.

[Alphahawk]

Good write up. I was just out at the TM headquarters yesterday looking at those. Of course they aren’t for me…I’m all about UL….but looked like quality heads.

Regards


Sent from my iPhone using Crappie.com

[DockShootinJack]

Very nice write up

[Snakebit]

Blake Phillips is a pretty good fella.
I got to go fishing with him in Eufaula and we didn't have much luck but his electronics got all out of whack after install on a new boat.
Awesome to see a local Dothan man make it in the crappie world.
He had several other ideas and this one hit hard.

[tattoodrew84]

Awesome Dave congratulations


Sent from my iPhone using Crappie.com Fishing mobile app

[duckhunter3635]

I bought some of these and tried them this past weekend they work great

[SuperDave336]

Good to hear. Looking forward to trying mine this Sunday. I think I might tie on both the ball head as well and the eye hole on a double jig setup to compare.

[SuperDave336]

Just a follow up. I did the double jig setup and you can tell a difference with these jigs. When they turn just right that flat side really returns a bright signal and they glow compared to the regular ball head jig.

[BobC]

Nice looking jigs and as said thanks for the write up. I have always done well with the TM products. Was just over at Dicks and they had a nice display of the line.
Bob

[DeadlyDan]

SuperDave,
After using the eye hole jig heads is there an obvious benefit to using the hammer head over the ball head version. I have a lot of ball heads ordered and fish LS.