HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: How Many Yards?

  1. #1
    Quailtail is offline Crappie Wall Hanger II * Crappie.com Supporter
    Join Date
    May 2009
    Location
    Kentucky
    Posts
    614
    Post Thanks / Like

    Default How Many Yards?


    I have several new reels that are pre-spooled with I think 4lb test. I can't tie a knot and snug it without it breaking. Reels are marked 4/200 yds. I want to respool with 10lb high vis cause I am old and can't see. For the people that are good with numbers, how much 10lb line will these reels hold? They are spinning reels, real small and I am using as spider rigg reels.

    Also, which brand of hi-vis do you recommend? I have used Stren Hi Vis in the past but can't find it on a big spool. 330yds is all I have found. But, Suffix and Andre I think it is called can be bought in larger spools. I have 8 reels to spool up.

  2. #2
    Join Date
    Sep 2012
    Location
    Dayton Tennessee
    Posts
    39,992
    Post Thanks / Like

    Default

    You can fall way down a rabbit hole looking at line diameter charts and conversion apps. 200yards of 4 pound line looks to be approximately 100 yards of 10 pound line if one can believe the calculators.
    The love for fishing is one of the best gifts you can pass along

  3. #3
    Quailtail is offline Crappie Wall Hanger II * Crappie.com Supporter
    Join Date
    May 2009
    Location
    Kentucky
    Posts
    614
    Post Thanks / Like

    Default

    That was what I was thinking. 100 yards is far more than anyone would need, even with break offs.

  4. #4
    Join Date
    Sep 2012
    Location
    Dayton Tennessee
    Posts
    39,992
    Post Thanks / Like

    Default

    For crappie it will be more than enough. Most fresh water fish don't make runs like that. In a boat just follow along.
    The love for fishing is one of the best gifts you can pass along

  5. #5
    CrappiePappy's Avatar
    CrappiePappy is offline Super Moderator - 2013 Man Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Lexington, KY
    Posts
    23,569
    Post Thanks / Like

    Default

    If the reels are real small (like 50series reels) and you're putting 10# test on them, I'd look to find the limpest mono I could find. Mono in 10# test on a small spool reel is going to have some serious coil memory. Then again, if you're SR'ing and using 1/2 - 3/4oz weights, that may not be as much of a problem ....

    Vicious is a pretty good, inexpensive line, and comes in 1/4lb spools (1500yds) of 10# test at nefishingtackle.com for about $12.25 (s/h included in price). Or from Grizzly Jig for about the same total price.
    Likes Tradbow LIKED above post
    Thanks BuckeyeCrappie thanked you for this post

  6. #6
    Join Date
    Oct 2012
    Location
    al
    Posts
    574
    Post Thanks / Like

    Default

    You could keep a lighter line on the spool to maximize capacity, but add the 10 pound as a leader. If you're having trouble with eyesight already then it may not be the best of idea because if that line breaks chances are it's going to be breaking at the lighter lb section. It is something to maybe think about but then again may not be the best option

    Sent from my SM-S215DL using Tapatalk
    Thanks Ketchn thanked you for this post

  7. #7
    happycaster58 is online now Crappie Wall Hanger II * Crappie.com Supporter
    Join Date
    Nov 2017
    Location
    SC
    Posts
    558
    Post Thanks / Like

    Default

    Check Amazon for Sufix 8lb test in hi-viz. $12.99 for 1720 yards. Good compromise on size to see and I have had good luck with Sufix lines.
    Likes Barnacle Bill, Tradbow LIKED above post

  8. #8
    Tradbow is offline Crappie.com 1K Star General * Crappie.com Supporter
    Join Date
    Feb 2019
    Location
    Eatonton, Georgia
    Posts
    1,772
    Post Thanks / Like

    Default

    I’ve been using Suffix hi-vis in 6# test monofilament the past year and I am really satisfied with it. I buy in the large rolls.

  9. #9
    Micanopy's Avatar
    Micanopy is offline Crappie.com 1K Star General * Crappie.com Supporter
    Join Date
    Jan 2021
    Location
    Micanopy, Florida
    Posts
    1,956
    Post Thanks / Like

    Default

    I don’t think the best solution is going to be using heavier line. Trading one little issue for several larger ones. They make clips that you can tie on at home, and then swap out jigs without tying. If snags are the issue as to why you need to retie often, then perhaps a tying tool would be helpful.

    Problem with estimating line on a spool is that each layer gets shorter as you approach the spool. Each winding not consistent. The cheap line that came on the spool can be used as backing, but at the price of mono, I would remove all of it.

    They sell magnifying visors, and it wouldn’t be that tough to find space aboard the boat for such a thing. Might come in very handy for all those other things that require good vision. Like reading cooking instructions on boxes. They always use the smallest print they can for those, but everything else on the box is easily read. It’s a conspiracy I tell you.
    Maybe they will bite this one……

  10. #10
    Join Date
    Jun 2011
    Location
    IN
    Posts
    328
    Post Thanks / Like

    Default

    You’d be able to get your 200 yds of 10 lb line on those small reels without fighting the memory issues of mono and be able too see the line better if you switch to braid. Just my opinion


    Sent from my iPhone using Crappie.com
    Happy Hooken.....
    Likes Techno2000 LIKED above post

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP