Do you typically run it in auto for depth and it has just started doing that?
My livescope just started doing this. The forward view bounces. Like it can't figure out the orientation of the transducer. Very strange. I checked for weeds on the ducer, wiped it off, changed it position slightly, and it continued. I quit fishing. Then the next day, it's ok for a while, and then starts doing it again. Nothing helped. I used it in perspective mode for a while, and the little boat in the top right which shows the direction of the beam, bounced up and down. It's all acting real weird. Here's a video.
S10CHEVY LIKED above post
Do you typically run it in auto for depth and it has just started doing that?
Yeah I usually don’t use auto. If you manually set depth does it still do it?
Panoptix AHRS Setup | Garmin Support
Try this. Or reset to factory specs and start adjusting from there. Lots of Facebook discussions on this topic. Hope it helps!
I always use auto. Always have. I’ll try manual and see. But I think it’s an issue with the position sensor. These transducers switch modes from down to front to perspective views all automatically.
Sent from my iPhone using Crappie.com
cattoon LIKED above post
Turn the depth finder off and back on....
https://Slabanatorjigs.com/
AND Slab-A-nator crappie jigs on facebook
CRAPPIE USA CLASSIC WINNER 2018Redge LIKED above post
Can’t speak from experience but see it often on FB groups. I’ve read calibrate compass or the AHRS.
Redge LIKED above post
I do think compass calibration is worth a try.
Sent from my iPhone using Crappie.com
Proud Member of Team Geezer!