Off Season upgrades. What are yours?

[BuckeyeCrappie]

[QUOTE=icehouse;4213588]Ordered clipboard clips from Amazon and screwed to 1/4” plywood that is secured to the ridge of lid!

I like it a lot! Gonna do opposite lid today and center storage lid. Should be able to hang about 70 bags of baits that I can easily identify by color and name!

What a great idea!

After you are done with other lid could you post pics w/o baits or step by step process?

[icehouse]

[QUOTE=BuckeyeCrappie;4213593]

Ordered clipboard clips from Amazon and screwed to 1/4� plywood that is secured to the ridge of lid!

I like it a lot! Gonna do opposite lid today and center storage lid. Should be able to hang about 70 bags of baits that I can easily identify by color and name!

What a great idea!

After you are done with other lid could you post pics w/o baits or step by step process?

Sure will!


Sent from my iPhone using Crappie.com

[Opie1]

I upgraded to a 48" adhesive measuring tape to stick to the inside of my boat to replace the 12" one I've had on it for years. I would think a 48" tape should be big enough for all the big crappie I catch but not sure yet.

[happycaster58]

The wife just Ok'ed the best upgrade ever- A NEW BOAT!! Boat show in 2 weeks!

[tlefire]

I like those! I have the same boat and was wondering if they made steps that would work with the Bear trailer and removeable hitch. Thanks for posting that. What brand are those?

Trick step. Talk to Joe and tell him it's for a 1710. They show one for a 1610 on their website. Joe didn't know if it would work on a 1710, so he had me do some calculations and checking degrees on the winch post and built it.

[muskyman]

I sold a kidney and got the ultrex.

[tlefire]

When I got my Terrova the foot pedal would not fit in the recessed pedal tray. Just put a board across it and I was good. Finally got around to making a proper board complete with plier and hemistat holder, Slab Sauce bottle holder, and a new mount for my Garmin. All the excess wiring fits inside the tray which I straighten up and also ran my livescope wire under the bow. Looks much better now.

[Gone Fishin']

Trick step. Talk to Joe and tell him it's for a 1710. They show one for a 1610 on their website. Joe didn't know if it would work on a 1710, so he had me do some calculations and checking degrees on the winch post and built it.

Thank you sir!

[DockShootinJack]

When I got my Terrova the foot pedal would not fit in the recessed pedal tray. Just put a board across it and I was good. Finally got around to making a proper board complete with plier and hemistat holder, Slab Sauce bottle holder, and a new mount for my Garmin. All the excess wiring fits inside the tray which I straighten up and also ran my livescope wire under the bow. Looks much better now.

You did some good work

[JD1]

Helix 7 G3N for the bow along with 5 port ethernet switch to network the 899 at console and the Ulterra.