HaHa HaHa:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Does fiberglass make a big difference in wind?

  1. #1
    Join Date
    Mar 2008
    Location
    Winnsboro, Louisiana
    Posts
    2,100
    Post Thanks / Like

    Default Does fiberglass make a big difference in wind?


    Back on the market for a boat after several years. Previous boat was a 2010 Bass Tracker 175 TXW, which I loved except for the fact very little wind made it difficult to cater to kids or even fish with more than 1 person. Was thinking about the Nitro Z7 to help with this.
    It is not what you do for your children, but what you have taught them to do for themselves, that will make them successful human beings.
    –Ann Landers
    Likes jackie53 LIKED above post

  2. #2
    Join Date
    May 2011
    Location
    highland, illinois
    Posts
    2,059
    Post Thanks / Like

    Default

    Fiberglass boat is typically heavier, and sits deeper in the water, making them less prone to "blowing" around. Also, fiberglass boat usually has less of a flat side, to catch the wind.
    Anyway you could rent, or borrow one? To try it out, before buying.
    Drinkin coffee, missin fish.

  3. #3
    jackie53's Avatar
    jackie53 is offline Crappie.com Legend * Crappie.com Supporter
    Join Date
    Jul 2010
    Location
    Edgemont/Greers Ferry lake
    Posts
    5,498
    Post Thanks / Like

    Default

    Today's Trolling motors is really the Difference so far in advance..Trolling Motor a Good one and Electronics..my opinion, I have both 20 ft glass and 16 ft Aluminum...The wind blows the aluminum around but able to control it with Trolling motor..


    Sent from my SM-J337A using Crappie.com Fishing mobile app
    John 3:16
    Blessed to have as many friends as fingers on your hand is a blessing!!!
    "Gone fish'n not wish'n"
    In God We Trust.
    Can God trust us.

  4. #4
    CrappiePappy's Avatar
    CrappiePappy is offline Super Moderator - 2013 Man Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Lexington, KY
    Posts
    23,566
    Post Thanks / Like

    Default

    .... my ProCraft 16' blows (drifts) fairly easily, even in a light wind. It just doesn't blow around as bad as my buddy's previous boat (Tracker TX17). The lower they sit in the water the less chance they'll blow around easily ... the trade-off being that high waves are more likely to come over the sides. The stronger your trolling motor, the greater the boat control to counteract the wind/waves blowing you around.
    Likes USMA65 LIKED above post

  5. #5
    Join Date
    Feb 2008
    Location
    Franklin, KY
    Posts
    757
    Post Thanks / Like

    Default

    I have found a big difference in boats you sit "in" as opposed to boats you sit "upon." Especially with kids (I have three) it is easier to keep them corralled with a boat with tall sides and a floor not far from the actual bottom of the boat.
    Likes USMA65, GREENFISH LIKED above post

  6. #6
    Join Date
    Mar 2008
    Location
    Winnsboro, Louisiana
    Posts
    2,100
    Post Thanks / Like

    Default

    Skunked again,
    I don’t know anyone with the Z7, know a few with more expense glass boats, but figure that wouldn’t be a true comparison.

    Jackie53,
    No doubt trolling motors are more advanced and my previous boat had the basic model. I thought about a power pole for shallow water, which then made me think glass because a few more thousand would get more boat for my range.
    It is not what you do for your children, but what you have taught them to do for themselves, that will make them successful human beings.
    –Ann Landers

  7. #7
    Join Date
    Mar 2008
    Location
    Winnsboro, Louisiana
    Posts
    2,100
    Post Thanks / Like

    Default

    Quote Originally Posted by smashdn View Post
    I have found a big difference in boats you sit "in" as opposed to boats you sit "upon." Especially with kids (I have three) it is easier to keep them corralled with a boat with tall sides and a floor not far from the actual bottom of the boat.
    Thought real hard about panfish model, but didn’t look comfortable for spider rigging. Really liked the 175 TF, but not crazy about seating arrangements.
    It is not what you do for your children, but what you have taught them to do for themselves, that will make them successful human beings.
    –Ann Landers

  8. #8
    Join Date
    Feb 2016
    Location
    Arkansas
    Posts
    538
    Post Thanks / Like

    Default

    I just switched from a 20’ Xpress to a 20’ Ranger 520. The difference in the wind is night and day, I’ve been amazed how much better it sits in the wind and doesn’t get blown all around. The dry weight between the 2 boats is only roughly 3-400lbs


    Sent from my iPhone using Tapatalk
    Likes blueball LIKED above post
    Thanks Slabprowler thanked you for this post

  9. #9
    Slabprowler is offline Crappie.com Legend * Crappie.com Supporter
    Join Date
    Dec 2014
    Location
    Scottsboro Al
    Posts
    9,480
    Post Thanks / Like

    Default

    I Have a 18’6” Xpress and love it ! But I have fished out of glass boats and I will definitely buy glass as soon as I can afford one ! With glass The ride in bigs waves is so much smoother,you don’t have the roll that you have on the front of most aluminum boats , and the wind doesn’t blow you near as much !
    Likes blueball LIKED above post

  10. #10
    sinkermaker is offline Crappie.com Legend * Crappie.com Supporter
    Join Date
    Feb 2011
    Location
    Lake Murray SC
    Posts
    6,125
    Post Thanks / Like

    Default

    I have a 20 ft multispecies glass boat and I can fish in 15 to 20 wind and still control it.
    Likes Slabprowler, USMA65 LIKED above post

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP