Show off your redneck ingenuity. Post your handiwork here. We need 100 more ideas. Here, I'll post the first.
I like dunking my jigs completely into the Slabsauce. On my Tracker I used a thin board with a hole cut into it, clamped on the gunnel and hung off the side of the boat. But on my glass Key West I had nothing to clamp it too. So I thought about it a bit, and this is what I came up with. Works out great for me, and I can even remove it easy enough and hang it up neatly away when I'm done:
We need 100 more ideas. Please post on this thread. Winner gets a 4 pack of Slabsauce (and two pack g-sauce) plus a coat hanger! Maybe a Crappie.com hat too. We see.
STD Disclaimer: rules and prizes subject to change without notice.
BarryG, SuperDave336, need2befishin, S10CHEVY, 1187mg, Redge, svh, shipahoy41, chaunc, shuorc and 3 others LIKED above post
Needed a mounting bracket for a hand control motor on my Wareagle. Wouldn’t pay what they wanted for factory to mount into T rail. Found this galvanized trailer roller bracket on clearance at academy for .98 cents. Cut a piece of 2x6 and used carriage bolts to mount it to bracket. Installed 2 carriage bolts in T rail then installed bracket. Perfect fit and adjustable up and down T rail and go anywhere on boat.
How did I know cray would be one of the first to post. Now we need cane pole and Rickey too. But I’m sure there are tons more folks, jump in, the water is warm.
Great idea cray btw.
Sent from my iPhone using Crappie.com
Don't have any picture's but made marker buoys from 1/2 gal plastic milk jugs. I fill them with spray foam. Just did four new ones yesterday used almost one can of foam. Tie 1/4" nylon rope on the handle and small tomato pates can for weight.
Tom 513 LIKED above post
for rods without a hook keeper I use a screw hole tywrap/cable tie !!!!
"What if you woke up today with only the things you thanked God for yesterday"
"Life without God is like an unsharpened pencil - it has no point. "AMEN"Don Fischer, Lake Life, trypman1, need2befishin, Crappie Chatt, S10CHEVY, 1187mg, svh, shipahoy41, Casting Costas and 12 others LIKED above post
Well, when my rods were in transport rack motoring down the highway the sinker would bounce around and oftentimes break my line. I was standing in the garage one day pondering how to keep the sinker tight to the rod and our youngest, who is a hair stylist said, hang on I have an idea. She gave me these small hair clips that work perfectly. Not an earth-shattering concept but it's cheap, effective and readily available.
Philippians 4:13 "I can do all things through Christ which strengtheneth me"
Wear that PFD, the life you save might be your own!!"D", Slab, Crappie Chatt, S10CHEVY, gsu57, 1187mg, svh, redfin00, huntinslabs, Fishn buddy and 9 others LIKED above post
Slab Sauce PFD (pool noodle section) :
Cane Pole, need2befishin, SuperDave336, S10CHEVY, Jamesdean, 1187mg, svh, Casting Costas, cva34, trypman1 and 3 others LIKED above post
I don't know where to start.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Converted trolling motor shaft to portable depth finder mount
Sent from my SM-G960U using Crappie.com Fishing mobile app
Cane Pole, S10CHEVY, Jamesdean, 1187mg, skeetbum, svh, trypman1, lipripper62, BDBFishing, SpeckledSlab LIKED above post