Originally Posted by
FurFlyin
I have not done the reset procedure. On that water, I didn't have to do that. I could turn it off, and turn it back on and it would clear the fault. It's not really a "fault" now. The motor that stows the unit has run in too far. If I knew what made it stop, I could run the bracket back out and have it going again in 20 minutes. I do not see any external proximity switches..... I can take a couple of E clips off, pull the motor off and rotate the "nut" for the acme thread until it's back where it needs to be. My question is, if I do that, is the motor still going to think that it's pulled in too far?
There are 2 external magnetic detectors. This could possibly be the problem. Let me look at my pictures and see if I can locate them. I changed mine out myself. MK set me the magnets to change out. They really didn't want to send he magnets. I convinced MK I was capable of changing magnets.
T
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"