Billbob says he's on his way, he'll help straighten out that wiring for you.
I picked the transducer apparatus up from Rickie at the c.com gathering in Kentucky last year. I finally got around to mounting my transducer. (Moles come out the hole on a warm day.) I am almost ready. Little more wiring to finish and need to raise my engine a notch or two.
This device looks good and works Jim Dandy.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Nice Tom. Rickie makes some very nice quality stuff. Lets go catch some crappie!
Life is Good !
2018 Kentucky & Tennessee Crappie Masters State Champs!
Thanks Buddy.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
One fine high tech fishin' machine.
"Proud Member of Team Geezer"
Very nice
Tom ...I don't see your GPS puck on da'ducer apparatus®...
Do you need the square VHMW top cap...??
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Do you think you can drive around with the transducer down. I have a tiller steer motor on a 19' boat and i could use one of those for scouting new holes. I have a terrova ordered and a Hummingbird 999 ci si di combo ordered and spyderloc 4 pole holders. I also got some 4 pole seats ordered so they can be moved around. My boat is a mud boat with a Prodrive mud motor. I dont have to worry about running over too much stuff even rocks. I was just curious. Didnt mean to jack your thread. Way nice boat by the way.
I had one of these units on a War Eagle. I "idled" around with the transducer down. I know the lake pretty well up here, so I wasn't worried as bout hitting anything. On the main channels, I would run up 8mph looking at stuff. I would not do this on unknown waters.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"