I have a Minn Kota 70 lb Maxxum on a 16'x48'' heavy Aluma Weld with 70 hp that will pull my boat 3.5 mph. Of Course that's 24 volt motor too, but boat is heavy as I run 3 big batteries too.
Got a deal on a footpedal and the copilot I can't refuse.
2003 Xpress X-17
MinnKota V2 Powerdrive
Humminbird 998c
Cumberland Crappie Racks
BnM PSTs
Looking for a Pro Staff Opportunity
I have a Minn Kota 70 lb Maxxum on a 16'x48'' heavy Aluma Weld with 70 hp that will pull my boat 3.5 mph. Of Course that's 24 volt motor too, but boat is heavy as I run 3 big batteries too.
Moderator of Beginners n Mentoring forum
Takeum Jigs
I have a Minn Kota 70lb PowerDrive V2, 24V I-pilot and i run it on a War Eagle 754 LDBR with 50hp Yamaha 4 stroke and it will run the boat between 3.5-4.0 on calm water.
it's not as heavy as a glass boat
I have a 17.5 g3 and a 55 pound v2 and it will pull it about 2.5 for a little while. It takes 50 amps to do so and will suck the power.
My glass boat might do 4 with the 101 on it with the 200 down, might do little over 4 with it raised up. Lot of drag to a glass boat but they sure sit in the water good on windy days.
1990 Stratos 285 Pro 200 HP Merc
SpyderLok Rod Holders
Proud Member of Team Watch The Finger!!!
(662) 458-8925
you been in my boat Rees so you know how it rides
No complaints, does good. There are pros and cons from the metal to the glass, its just facts.
1990 Stratos 285 Pro 200 HP Merc
SpyderLok Rod Holders
Proud Member of Team Watch The Finger!!!
(662) 458-8925
exactly.