Reply With QuoteThere should be a tag near the plug of the transducer. Go in the menus and find transducer selection and be sure the correct transducer I’d is selected.
As far as recording thing I haven’t ever seen that. Is this a new unit?
Likes: 0
Thanks: 0
HaHa: 0
Slabmaster
Need help on Garmin Fishfinder
I have a 93 SV UHD fish finder that I can’t figure out a problem I am having. On the screen it comes up Sonar Recording transducer not found. I know transducer is connected. I don’t know if I selected something accidentally but I can’t get it to go off. Any suggestions. I have put a picture below. Thanks in advance.
Sent from my iPad using Crappie.com
Crappie.com 1K Star General
There should be a tag near the plug of the transducer. Go in the menus and find transducer selection and be sure the correct transducer I’d is selected.
As far as recording thing I haven’t ever seen that. Is this a new unit?
Crappie Wall Hanger II
What transducer do you have? If LS maybe you have selected the wrong one
Super Moderator
* Crappie.com Supporter
Check all your connections. I’ve had a bad connection before that I believe gave a message like that.
Crappie Wall Hanger II
Mine did that yesterday for the first time. Take it out of the cradle relock back in cradle and turn it back on fixed mine. A friend had that problem and ended up replacing the cradle because it had a bad plug.
Sent from my moto g(7) power using Crappie.com Fishing mobile app
Crappie.com Legend
If problem is still there, call Garmin customer support. They have successfully assisted me with issues in the past. Good luck!
Yes, as a matter of fact, I do have a retirement plan...FISHING!
Slabmaster
I have had it about 4 years and this is first time I have seen this and it did it a few days ago. I think it is reading the right transducer but I’ll check that out. ThanksOriginally Posted by lowe rider
Sent from my iPad using Crappie.com
Slabmaster
It is a GT 54 and no live scope connected to it. It stands alone now. I have had it networked to another unit but it is not now. Thanks
Sent from my iPad using Crappie.com
Slabmaster
I think the connections are ok. I forgot to mention this only happens when it is on simulator. I was putting it in simulator to try some different settings and this popped up. Thanks
Sent from my iPad using Crappie.com
Slabmaster
Tried that and it didn’t change anything. I just used it on lake Thursday just find. This just comes up in simulator mode. Thanks
Sent from my iPad using Crappie.com
Posting Permissions
