I am going to have to make some ceiling ones foe the garage.
You Guy's are great with DIY projects; I like those holders.
2002 Bass Tracker PT185 90hp Mercury ELPTO
Everything Millennium
B'n'M PST's
1236 Jon Boat 5hp MercuryCentKyPaddler thanked you for this post
I am going to have to make some ceiling ones foe the garage.
“If your too busy to fish, you’re too busy!” Buddy Ebsen
PROUD MEMBER OF TEAM GEEZER
(Billbob and “G” approved!)
Proud member of Tekeum’s Jigs Pro
Staff
https://heavenornot.net/
heavenornot.netCentKyPaddler thanked you for this post
Here are few extra pics. I basically just cut the boards to the length and c-clamped. Marked my holes equally distant with 4 inch spacing and drilled through them both at the same time. I used 2x4 cut at 8 inches for the space between the two holders. My next project will be horizontal wall hangers for the longer jig rods.
Sent from my iPhone using Crappie.com
My wife says I have too many tools. But even the hole saws come in handy now and then.
Like fishing gear, I don’t think you can ever have too many tools!
Sent from my iPhone using Crappie.com
DWILL, bassman356 LIKED above post