Thanks Thanks:  0
HaHa HaHa:  0
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: 22 scope woes

  1. #11
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default


    I put a raised mount on my 10/22 so I could use the iron sites as well. Works pretty good, but I just plink cans with mine.
    Mark 1:17 ...I will make you fishers of men
    Likes RetiredRR LIKED above post

  2. #12
    skeetbum's Avatar
    skeetbum is offline Crappie.com Legend - Moderator Jig Tying Forum * Crappie.com Supporter
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    23,013
    Post Thanks / Like

    Default

    I can't speak about 22 scopes but I dealt with the low light issues with my deer rifle. I went to a Leupold 3X9X40 in VariX II and found a shocking difference. The low light clarity of the better scope was so different that I can't use anything else knowing how much better it is. A few extra dollars on a better piece of glass is worth every nickel.
    Creativity is just intelligence fooling around

  3. #13
    Eagle 1's Avatar
    Eagle 1 is offline Crappie.com Legend and Mississippi Moderator
    Join Date
    Mar 2010
    Location
    New Albany, Mississippi
    Posts
    14,565
    Post Thanks / Like

    Default

    the weaver 2-7 vr7 which is only a 28 mm scope is 4 x better than the Simmons 8 point . Much better glass but is also reflected in cost . about $150.00 . You can see at low light . Same quality as a Nikon just made in japan rather than china . I have several Leopold scopes but could not find a rim fire in stainless .

  4. #14
    Join Date
    Jul 2012
    Location
    Arkansas
    Posts
    54
    Post Thanks / Like

    Default

    I bought a BSA sweet 22 and it works great so far.. I also purchased a suppressor for my rig as well.. I love it... just wish I could find .22 ammo in my area..

  5. #15
    Join Date
    Jun 2009
    Location
    Leslie
    Posts
    4,396
    Post Thanks / Like

    Default

    I wouldn't worry about parralux on a 10/22 scope.

    At one time in my life (a little while ago now) I was a weapons instructor and scout sniper in the Marine Corps. I've done a lot of playing with scopes (during that time and after). I've done my fair share with the 22lr and 17hmr as well. I did not notice that much of a difference between a parralux setting of 100 yrds vice 50. My last test was with a 17hmr. I put a standard scope (non parralux) and sighted it in at 100yrds with a .5moa (less than a 1/2 inch group at 100 yards). I then came back with a target at 50 yards and noticed very little difference in height. I changed out to a newer model with parralux and got identicle results.

    My 22lr had the same testing done with similar results. My best advice is this: Know the weapon, the bullet, and what it can/will do. If you sight it in for one distance (say 75 yards) know what it will do at 25, 50 and so on. Worst case is that you write it on a card and tape it to your weapon.

    My training taught me to be a little to anal with certain things (nature of the beast).
    I choose Leupold on my higher end weapons but my last few purchases have all been Nikon.
    Lastly, make sure you get the reticle that works for you. For a small animal, I prefer "fine duplex" or mil dot (same for long range).

    PM me if you would like any more information. Just covering the basics here.
    I have OCD "Obsessive Crappie Disorder"

  6. #16
    Join Date
    Mar 2014
    Location
    Danville, Virginia, United States
    Posts
    410
    Post Thanks / Like

    Default

    leupold- low as power as will suit your target- 2-5 power range- or if got money to spend ziess- they'r unreal on light gathering- got couple both- one of my ziess is a 1.5x5 that would be awesome for squirrels- works pretty good on whitetails too!
    My wife swears I only do enough surveying to support my hunting & fishing because I'm too busy hunting & fishing !

  7. #17
    Join Date
    Mar 2006
    Location
    West Tennessee
    Posts
    1,594
    Post Thanks / Like

    Default

    I have a 2-5 leupold on mine. Great for ac22.

    Had one of those BSA Sweet 22 scopes. Piece of junk.

  8. #18
    Join Date
    Sep 2009
    Location
    Anderson, South Carolina, United States
    Posts
    3,407
    Post Thanks / Like

    Default

    Quote Originally Posted by eagle 1 View Post
    was this a rim fire scope ? looking for stainless / silver . not as many choices as yrs. past . Nikon/Léopold are what I normally buy but leaning to a weaver vr-7 rim fire . a little more than a Nikon rim fire , but nice for sure . like most things they all make high/low end . Nikon does not offer a stainless in a rim fire and I want a parallax (?)of 50 yds. . not 100 yds. . close range squirrel gun .
    leopold vear x3 the only way to go got one on a ruger 10/22
    team member

    of the 2011 winners of the c.d.c. lake hartwell fall fest

  9. #19
    Join Date
    May 2008
    Location
    Tavares, Fl
    Posts
    11,091
    Post Thanks / Like

    Default

    If you go up to 4X12 you will have a ton more options with adjustable objectives for parralax. And you will not notice much difference between 3 and 4 power. Thats what I did.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP